DT bindings for the Ethernet switch found on Microsemi Ocelot platforms.
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
.../devicetree/bindings/net/mscc-ocelot.txt | 62 ++++++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
new file mode 100644
index 000000000000..ee092a85b5a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
@@ -0,0 +1,62 @@
+Microsemi Ocelot network Switch
+===============================
+
+The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
+VSC7514)
+
+Required properties:
+- compatible: Should be "mscc,ocelot-switch"
+- reg: Must contain an (offset, length) pair of the register set for each
+ entry in reg-names.
+- reg-names: Must include the following entries:
+ - "sys"
+ - "rew"
+ - "qs"
+ - "hsio"
+ - "qsys"
+ - "ana"
+ - "portX" with X from 0 to the number of last port index available on that
+ switch
+- interrupts: Should contain the switch interrupts for frame extraction and
+ frame injection
+- interrupt-names: should contain the interrupt names: "xtr", "inj"
+
+Example:
+
+ switch@1010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-switch";
+ reg = <0x1010000 0x10000>,
+ <0x1030000 0x10000>,
+ <0x1080000 0x100>,
+ <0x10d0000 0x10000>,
+ <0x11e0000 0x100>,
+ <0x11f0000 0x100>,
+ <0x1200000 0x100>,
+ <0x1210000 0x100>,
+ <0x1220000 0x100>,
+ <0x1230000 0x100>,
+ <0x1240000 0x100>,
+ <0x1250000 0x100>,
+ <0x1260000 0x100>,
+ <0x1270000 0x100>,
+ <0x1280000 0x100>,
+ <0x1800000 0x80000>,
+ <0x1880000 0x10000>;
+ reg-names = "sys", "rew", "qs", "hsio", "port0",
+ "port1", "port2", "port3", "port4", "port5",
+ "port6", "port7", "port8", "port9", "port10",
+ "qsys", "ana";
+ interrupts = <21 22>;
+ interrupt-names = "xtr", "inj";
+
+ port0: port@0 {
+ reg = <0>;
+ phy-handle = <&phy0>;
+ };
+ port1: port@1 {
+ reg = <1>;
+ phy-handle = <&phy1>;
+ };
+ };
--
2.16.2
