On Tue, Apr 21, 2009 at 15:46, nagalakshmi veeramallu
<lucky.veeramallu@xxxxxxxxx> wrote:
> hi,
> -- if we set environmental variable “start” as “go
> new_address”, will it go directly to the new bootloader in the next
> power-on.
> what about using system environmental "start" ,can you tell me at which
> context after power on environmental variables come onto picture.
Environment variables are parsed by the boot loader, whose code resides at,
guess what, 0x1fc00000...
> On Tue, Apr 21, 2009 at 6:55 PM, Kevin D. Kissell <kevink@xxxxxxxxxxxxx>
> wrote:
>>
>> nagalakshmi veeramallu wrote:
>>
>> - Mips atlas board has jumper which will redirect accesses from
>> “Bootcode” range to either “Monitor flash” (0x1e000000) or the upper 4MB of
>> “System flash” (0x1dc00000) based on jumper settings. if my kmc board have
>> some jumper like this, can I redirect the start address.
>>
>> Of course, what is really happening there is that the Atlas boot ROM has a
>> vector at 0x1fc00000 which reads the jumper and jumps to one address or the
>> other depending on the jumper setting. If you control what is in ROM at
>> 0x1fc00000 and you have a software-readable jumper on your KMC board, you
>> can do the same thing.
>>
>> Regards,
>>
>> Kevin K.
>>
>
>
--
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
