Re: Portmap on the Encore M3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 13, 2006 at 06:03:07PM -0800, Ashlesha Shintre wrote:

> > > > 16.35 BogoMIPS (lpj=8176)
> > 
> > Sounds about right if your CPU clock hapens to be 8MHz so probably not.
> > Chances the counter was missprogrammed.  Or are you running uncached?
> > Uncached will completly devastate performance.
> > 
> 
> For the AU1500 processor, the CPU Clock is derived from the PLL whose
> input is 12MHz.. Upon reading the value of the SYS_CPUPLL register in
> the calibrate_delay function, I found out that the multiplying factor is
> 40, thus, the CPU Clock frequency is 480MHz.. Thus the lpj should be
> approximately 480000 -- right?

>From a CPU core like the Alchemy core I would more expect half of that
number, 240000.  That is if HZ is 1000 which I believe it was still
hardwired for kernels of the vintage you're running.

> Also I dont know what you mean by "running uncached"?

CONFIG_MIPS_UNCACHED which disables all processor caches.  Bad idea.

> Thanks a lot, I will check the problem with the serial driver -- i m
> using the 8250.c serial driver..

Use CONFIG_SERIAL_AU1X00.

  Ralf


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux