1.If i have a compulsion to use egde triggering peripheral on MIPS CP0, would it be useful if i can increase the assertion duration of edge interupts (this I can do) ..I mean to say probablity of loosing edge interrupts will decrasse. 2.does CP0 interrupt logic samples interrupts after each instruction or at some multiplication(..or division.?) of system clock. Regards, Ashish On Mon, 17 Nov 2003 Ralf Baechle wrote : >On Mon, Nov 17, 2003 at 11:40:11AM -0000, ashish anand wrote: > > > I have a generic question regarding interrupt controler functionality > > integrated in CP0 on mips architecture. > > I don't see any interface to configure the edge/level triggering settings. > >MIPS only supports level triggered interrupts in coprocessor 0. > > > though in our BSP we take care of handling spurious interrupts , but is > > this designed to be like that..? > >There is no handling needed. If the processor takes an interrupt but none >of the interrupt bits in c0_status is set, just return. That's a legal >condition. > > > I mean to ask , suppose I want to add a edge triggering peripheral. > > to the extent of my understanding this will certainly generate the > > spurious interrupts when coupled with a level triggering configuration > > in CP0 (by default..?). > >You can directly sample the level of the edge irq in the interrupt bits in >the cause register. But that seems a fragile approach. > > > if i am handling through CP0_CAUSE or any other register inspection > > that can work but I am loosing so many valid interupts which would have > > been really valid with edge trigger pin of interrupt controller . > > further this type of handling is valid for actual spurious interrupts > > not for those who are certain to be fired because of edge/level mismatching. > >If you really need to use an edge triggered interrupt on a MIPS then you >probably want to use some circuit interrupt controller that converts the >edge to a level triggered interrupt. > > Ralf
