On Fri, 2003-06-06 at 10:08, Pete Popov wrote: > Hi Jan, > > > /etc/pcmcia/config.opts: > > include port 0x100-0x4ff, port 0xc00-0xcff > > include memory 0x80000000-0x80ffffff > > I think you need something like that for mips as well. > > > THEN, i saw in the linux-mips archives, that Jeff Baitis has succeeded > > in getting it working on 2.4. He had applied two patches: > > Pete's 36bit_addr_2.4.21-pre4.patch > > Pete's 64bit_pcmcia.patch > > > I've found and patched theese into my kernel, but now, nothing works! > > Not surprising :) The 36bit_add_xxxx patch was applied to the tree so > it's not integrated in the source tree. So this begs the question -- Sorry, this should read "...it's now integrated in the source..." Pete > what version of linux-mips are you using? If you're using the latest cvs > bits, applying the above 36bit patch should have failed miserably. You > do need the 64bit_pcmcia.patch though. > > Take a look at the archives again and see how Jeff setup config.opts on > the target board. That was the key. The cardmgr is recognizing your > card so it's reading the attribute memory successfully. You're almost > there ;) > > Pete > > > >
