Hm, how did I get that one wrong - I copy/pasted the command from the maemo site... Now I get the following output: root@Elanimal: ./flasher-3.0 -F RX-44_DIABLO_4.2008.23-14_PR_COMBINED_MR0_ARM.bin -f -R ... ... USB device found found at bus 003, device address 005 Found device RX-44, hardware revision 0805 NOLO version 1.1.7 Version of 'sw-release': <no version> Sending xloader image (9 kB)... Write failed after 0 bytes usb_bulk_write: Resource temporarily unavailable root@Elanimal: Frederic Crozat wrote: >> After connecting the N810 via USB and switching it on (with the key on >> the left side pressed) I get a message telling me the current software >> version is 50.2 and then flasher exits (I started flasher as root, >> using ./flasher3.0 imagefile -f -R as given on the flash update page >> at maemo.org). > > wrong command : > ./flasher-3.0 -F imagefile -f -R _______________________________________________ maemo-users mailing list maemo-users@xxxxxxxxx https://lists.maemo.org/mailman/listinfo/maemo-users
