I got my 770 three days ago and I have difficulty getting my WiFi connection to work correctly when using 802.11g or 802.11b/g. Everything works fine with routers set to 802.11b only. I hope there is someone that could tell me how to correct this. I have supplied as much information as I could find. Let me tell what I have tried. Test environment: * Nokia 770 (3.2005.51-13) * Router - Linksys WRT54GSV4 When I set the router to 802.11b only my connection works fine. When I switch the router to 802.11g only or 802.11b/g I can not get a connection from the 770. At first I thought that it was the router (even though my laptop works with the router under all settings). I tried the same thing with a Netgear router and experienced the same problem when the router was set to g or b/g. I also tried connecting to other routers at various hot-spots, the connection only works with routers set to b only. Most places where I want to use the connection have their routers set to g or b/g so it is important for me to get this working. I also tried to disable security on the router but it did not help. This is what happens when I try to connect to a router that is set to b/g (mixed mode): * The router is identified, the SID is shown and the signal is strong (I sat close to the router). * I select the router and the W flashes for a few seconds and then shows it is connected. * When I look at the IP assigned I see that it did not connect (169.254.178.242 default router 0.0.0.0). Here is the dmesg output when I try to connect to the router in mixed mode: [ 601.337280] Loading 3825.arm firmware [ 602.149200] CX3110x: MAC address xx:xx:xx:xx:xx:xx (I removed the detail) [ 602.318908] No power saving [ 604.741210] Scan complete, scanned 11 channels [ 619.193908] No power saving [ 619.537384] Scan complete, scanned 11 channels [ 619.641784] No power saving [ 619.642333] No power saving [ 620.982330] We wake up for DTIMs [ 648.414245] autoipd uses obsolete (PF_INET,SOCK_PACKET) [ 731.493011] hwa742: setting update mode to disabled [ 731.493072] hwa742_notifier_cb(): event = DISABLED [ 772.761566] hwa742: setting update mode to manual [ 772.761596] hwa742_notifier_cb(): event = READY Here is the dmesg output when I connect to the router in b mode only: [ 1100.197875] Loading 3825.arm firmware [ 1101.108398] CX3110x: MAC address xx:xx:xx:xx:xx:xx (I removed the detail) [ 1101.280090] No power saving [ 1103.703186] Scan complete, scanned 11 channels [ 1106.212493] No power saving [ 1106.509826] Scan complete, scanned 11 channels [ 1106.552886] No power saving [ 1106.553344] No power saving [ 1107.888732] We wake up for DTIMs [ 1175.946136] hwa742: setting update mode to disabled [ 1175.946197] hwa742_notifier_cb(): event = DISABLED
