|
I am trying to “undo” the software raid setup on
a system. I have been able to simply change the partition type from “linux
raid auto detect” to “linux” and mount the filesystems which
were previously formatted on top of the md device directly to the underlying
/dev/hda[0-9] device. The PV was originally added as /dev/md1 to
the VG. I tried setting the partition type from “linux raid
autodetect” to “linux LVM” but vgscan and vgimport both give
an error about the PV is part of a multiple device. Does anyone have a
procedure for going from LVM on top of linux md software raid to LVM without md?
Any help would be much appreciated. Thank You E-mail confidentiality. -------------------------------- This e-mail contains confidential and / or privileged information belonging to Spirent Communications plc, its affiliates and / or subsidiaries. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution and / or the taking of any action based upon reliance on the contents of this transmission is strictly forbidden. If you have received this message in error please notify the sender by return e-mail and delete it from your system. If you require assistance, please contact our IT department at helpdesk@spirentcom.com. Spirent Communications plc, Spirent House, Crawley Business Quarter, Fleming Way, Crawley, West Sussex, RH10 9QL, United Kingdom. Tel No. +44 (0) 1293 767676 Fax No. +44 (0) 1293 767677 Registered in England Number 470893 Registered at Spirent House, Crawley Business Quarter, Fleming Way, Crawley, West Sussex, RH10 9QL, United Kingdom Or if within the US, Spirent Communications, 26750 Agoura Road, Calabasas, CA, 91302, USA. Tel No. 1-818-676- 2300 |
_______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
