Acoording to the wiki section "Devices" about chip IT8620E: > (2014-03-16) One request (Kertesz Laszlo). No datasheet. We had a report that the chip is somewhat compatible with the IT8728F for the hardware monitoring part. Be very careful with fan control as it wasn't tested. So you can try loading the it87 driver with force_id=0x8728 and see how it goes. If you do, please report! I tried "modprobe it87 force_id=0x8728" and I've got the following output from "sensors": > coretemp-isa-0000 > Adapter: ISA adapter > Core 0: +44.0°C (high = +105.0°C, crit = +105.0°C) > Core 1: +44.0°C (high = +105.0°C, crit = +105.0°C) > Core 2: +44.0°C (high = +105.0°C, crit = +105.0°C) > Core 3: +44.0°C (high = +105.0°C, crit = +105.0°C) > > it8728-isa-0a30 > Adapter: ISA adapter > in0: +0.68 V (min = +2.48 V, max = +0.37 V) > in1: +2.02 V (min = +1.55 V, max = +0.00 V) > in2: +2.00 V (min = +2.83 V, max = +0.19 V) > +3.3V: +3.74 V (min = +2.64 V, max = +3.26 V) > in4: +0.84 V (min = +2.62 V, max = +1.85 V) > in5: +2.04 V (min = +1.38 V, max = +0.59 V) > in6: +1.36 V (min = +0.26 V, max = +2.99 V) > 3VSB: +3.38 V (min = +5.33 V, max = +2.40 V) > Vbat: +3.10 V > fan1: 1320 RPM (min = 25 RPM) > fan2: 0 RPM (min = 10 RPM) > fan3: 0 RPM (min = 11 RPM) ALARM > fan4: 0 RPM (min = -1 RPM) > fan5: 0 RPM (min = -1 RPM) > temp1: +35.0°C (low = -106.0°C, high = -6.0°C) sensor = thermistor > temp2: -55.0°C (low = +104.0°C, high = +64.0°C) sensor = disabled > temp3: -55.0°C (low = +27.0°C, high = +96.0°C) sensor = disabled > intrusion0: ALARM "uname -a" output: > Linux ael 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64 GNU/Linux -- tommy.ael gpg key: 0xEBD8B3682C4C4645 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
