Re: [PATCH v5 1/4] hwmon: ltc2978: device tree bindings documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 02, 2014 at 01:37:48PM -0500, atull@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> 
> Add device tree bindings documentation for ltc2978.
> 
> Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> ---
> v2: clean whitespace
> ---
>  .../devicetree/bindings/hwmon/ltc2978.txt          |   41 ++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> new file mode 100644
> index 0000000..b2d9c4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> @@ -0,0 +1,41 @@
> +ltc2978
> +
> +Required properties:
> + - compatible: one of: ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676
> + - reg: I2C address
> +
> +Optional properties:
> + Name of the optional regulator subnode must be "regulators".

This is currently a problem. The regulator core trats it as mandatory,
meaning I get error messages such as

ltc2978 5-005e: Failed to find regulator container node

if not specified. We'll have to sort out with the regulator core how this should
be handled.

> +  - #address-cells must be 1.
> +  - #size-cells must be 0.
> +

Checking this out, those do not seem to be necessary.

> + For each regulator:
> +  - reg: regulator number

This does not seem to be necessary either.

> +  - regulator-compatible: must be vout_en<regulator number> such as vout_en3
> +    valid range is:
> +      ltc2977, ltc2978 : vout_en0 - vout_en7
> +      ltc2974          : vout_en0 - vout_en3
> +      ltc3880, ltm4676 : vout_en0 - vout_en1
> +      ltc3883          : vout_en0 only

Besides the unnecessary _en, this is a problem if there is more than one
supported chip in the system, if DEBUG_FS is enabled, and if names are not
specified in the devicetree file. I get a lot of error messages in a
system with a large number of LTC2978 chips.

vout3: Failed to create debugfs directory
vout4: Failed to create debugfs directory
vout5: Failed to create debugfs directory
vout6: Failed to create debugfs directory
vout7: Failed to create debugfs directory
vout2: Failed to create debugfs directory
vout3: Failed to create debugfs directory

and so on (40+ times in my system). We will have to find a solution for this
problem.

I also get

vout7: no parameters

for each regulator which is a bit annoying with 50+ of those regulators
in the system.

Guenter

> +  - regulator-name: arbitrary name for regulator
> +
> +Example:
> +ltc2978@5e {
> +	compatible = "ltc2978";
> +	reg = <0x5e>;
> +	regulators {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		vdacp0_reg: regulator@0 {
> +			reg = <0>;
> +			regulator-compatible = "vout_en0";
> +			regulator-name = "FPGA-2.5V";
> +		};
> +		vdacp2_reg: regulator@2 {
> +			reg = <2>;
> +			regulator-compatible = "vout_en2";
> +			regulator-name = "FPGA-1.5V";
> +		};
> +	};
> +};
> -- 
> 1.7.9.5
> 

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux