On Wed, Sep 24, 2014 at 6:55 PM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote: > Sorry, should have said "output in kernel log". Must have been confused. OK, I found this in kern.log: Booting with the older version 0902: --------- Sep 23 20:52:17 glados kernel: [ 0.000000] DMI: ASUS All Series/Z97-A, BIOS 0902 05/08/2014 [...] Sep 23 20:52:17 glados kernel: [ 1.749182] nct6775: Enabling hardware monitor logical device mappings. Sep 23 20:52:17 glados kernel: [ 1.749192] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290 Sep 23 20:52:17 glados kernel: [ 1.753535] ppdev: user-space parallel port driver Sep 23 20:52:17 glados kernel: [ 1.753603] wmi: Mapper loaded -------- No problem, proceeds to load next module. Then booting with BIOS 1008 (and same for later ones) --------- Sep 23 20:59:28 glados kernel: [ 0.000000] DMI: ASUS All Series/Z97-A, BIOS 1008 05/29/2014 [...] Sep 23 20:59:28 glados kernel: [ 1.700948] nct6775: Enabling hardware monitor logical device mappings. Sep 23 20:59:28 glados kernel: [ 1.700959] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290 Sep 23 20:59:28 glados kernel: [ 1.700963] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_GPE.HWM_ 1 (20131115/utaddress-251) Sep 23 20:59:28 glados kernel: [ 1.700966] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Sep 23 20:59:28 glados kernel: [ 1.703764] wmi: Mapper loaded Sep 23 20:59:28 glados kernel: [ 1.707021] ppdev: user-space parallel port driver --------- So there is a conflict. Ulrike _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
