On Tue, 18 Feb 2014 20:11:40 -0800, Guenter Roeck wrote: > On 02/18/2014 07:18 PM, ianp wrote: > > I though about it too at first, that Voltage X corresponds to inX in lm-sensors. The problem is, if you look at the default configuration lm-sensors provide at /etc/sensors3.conf: > > > > chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" > > > > label in0 "Vcore" > > label in2 "AVCC" > > label in3 "+3.3V" > > label in7 "3VSB" > > label in8 "Vbat" > > > > set in2_min 3.3 * 0.90 > > set in2_max 3.3 * 1.10 > > set in3_min 3.3 * 0.90 > > set in3_max 3.3 * 1.10 > > set in7_min 3.3 * 0.90 > > set in7_max 3.3 * 1.10 > > set in8_min 3.0 * 0.90 > > set in8_max 3.0 * 1.10 > > > > You can see that in3 is "+3.3V". Of course I tried modifying in3 in my configuration as follows: > > That is just a generic description for settings which are > often seen for those SuperIO chips. That doesn't mean they > apply in any way to your board. No, this isn't correct. We stopped with this long ago. Today the file installed as /etc/sensors3.conf only contains statements which are always correct. The comment at the top of the file says exactly that: # This default configuration file only includes statements which do not # differ from one mainboard to the next. Only label, compute and set # statements for internal voltage and temperature sensors are included. If you look at the W83627DHG-P datasheet, you'll see that in2, in3, in7 and in8 monitor the chips's own power sources (AVCC, 3VCC, 3VSB and Vbat in this order.) The chip can monitor only 5 external voltages, with Vcore always being in0 and in1, in4, in5 and in6 being the generic inputs which can be used to monitor any other voltage. So there's no way +5V is in3, sorry. +5V and +12V can only be amongst in1, in4, in5 and in6. From there it's really only a matter of finding the right mapping and scaling factors. Please follow my guide here to get this right: http://www.lm-sensors.org/wiki/VoltageLabelsAndScaling Your chip's native voltage range is 2.04 V i.e. LSB = 8 mV. -- Jean Delvare Suse L3 Support http://jdelvare.nerim.net/wishlist.html _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
