On Mon, Nov 11, 2013 at 11:27:03PM -0800, p. stephen w wrote: > Please see attached. > ___________________________________________________- > The output is attached and matches the order... > > isadump -k 0x55,0x55 0x295 0x296 > isadump -k 0x55,0x55 0x295 0x296 1 > .... > isadump -k 0x55,0x55 0x295 0x296 8 > > > > > On Mon, Nov 11, 2013 at 9:22 PM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote: > > > On Mon, Nov 11, 2013 at 08:05:46PM -0800, Guenter Roeck wrote: > > > > [ ... ] > > > > > No, it won't. I'll dig out other commands for you to run to give me some > > chip > > > register output. > > > > > Following up on this. It would be great if you can do the following. > > > > When executing the the sensors command, you see something like > > > > nct6791-isa-0a00 > > > > for the NCT chip. Take the hex number at the end; based on it, run the > > following sequence of commands: > > > > sudo isadump -k 0x55,0x55 0xa05 0xa06 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 1 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 2 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 3 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 4 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 5 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 6 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 7 > > sudo isadump -k 0x55,0x55 0xa05 0xa06 8 > > > > In other words, add 5 and 6 to the hex number and pass it as parameter to > > the > > isadump commands. > > > > This should create a dump of chip registers, which would hopefully help me > > track > > down the problem with pwmX_temp_sel. > > Hi, I think I fixed the problem. It would be great if you can update the repository from github and try again. Please provide output from the sensors command as well as from "grep . /sys/class/hwmon/hwmon2/device/*". Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
