On 10/16/2013 11:20 AM, Wei Ni wrote: > Hi, Jean > > Do you have any comments on this series, or will you take them ? Hi, Jean, will you apply this series befor the 3.13 merge window? Since I forgot to tell Stephen not to apply the "[PATCH 0/2] Update dts file to support lm90 well" untile this series are accept, so if without this change, the lm90 may be broken on the Dalmore board. Thanks. Wei. > > Thanks. > Wei. > > On 10/07/2013 05:25 PM, Wei Ni wrote: >> The device lm90 can be controlled by the vcc rail. >> Add function to power on/off the vcc. >> I will update all .dts files referencing this driver to >> match the new requirement in my next series. >> >> This series is v5, previous version patches are: >> [v4]: http://www.spinics.net/lists/lm-sensors/msg39583.html >> [v3]: http://www.spinics.net/lists/lm-sensors/msg39503.html >> [v2]: http://www.spinics.net/lists/arm-kernel/msg265373.html >> [v1]: http://www.mail-archive.com/linux-tegra@xxxxxxxxxxxxxxx/msg12034.html >> >> Changes from v4: >> 1. set vcc-supply as required property. >> >> Changes from v3: >> 1. change to use devm_regulator_get, as per discussion in previous patches. >> 2. just return errors when get error from regulator_get(), Mark's new dummy >> regulator can cope with errors. >> 3. add vendor prefix for GMT >> 3. list manufacturer in the binding doc. >> >> Changes from v2: >> 1. use devm_regulator_get_optional(), as suggested by Mark. >> 2. remove the lm90_power_control(), enable the regulator in the probe() >> directly, so the codes are more clear, as suggested by Alexander and Guenter. >> 3. change the binding documentation, as per Stephen suggestion. >> 4. couple of changes, as per previous review. >> >> Changes from v1: >> 1. if get regulator failed, we should continue to run probe function, >> not return fail. >> 2. call regulator_put() in error handler and remove function. >> 3. add LM90 DT binding document. >> >> Wei Ni (3): >> hwmon: (lm90) Add power control >> of: add vendor prefix for GMT >> Documentation: dt: hwmon: add OF document for LM90 >> >> Documentation/devicetree/bindings/hwmon/lm90.txt | 44 ++++++++++++++++++++ >> .../devicetree/bindings/vendor-prefixes.txt | 1 + >> drivers/hwmon/lm90.c | 19 +++++++++ >> 3 files changed, 64 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt >> > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
