Hi, Jean Do you have any comments on this series, or will you take them ? Thanks. Wei. On 10/07/2013 05:25 PM, Wei Ni wrote: > The device lm90 can be controlled by the vcc rail. > Add function to power on/off the vcc. > I will update all .dts files referencing this driver to > match the new requirement in my next series. > > This series is v5, previous version patches are: > [v4]: http://www.spinics.net/lists/lm-sensors/msg39583.html > [v3]: http://www.spinics.net/lists/lm-sensors/msg39503.html > [v2]: http://www.spinics.net/lists/arm-kernel/msg265373.html > [v1]: http://www.mail-archive.com/linux-tegra@xxxxxxxxxxxxxxx/msg12034.html > > Changes from v4: > 1. set vcc-supply as required property. > > Changes from v3: > 1. change to use devm_regulator_get, as per discussion in previous patches. > 2. just return errors when get error from regulator_get(), Mark's new dummy > regulator can cope with errors. > 3. add vendor prefix for GMT > 3. list manufacturer in the binding doc. > > Changes from v2: > 1. use devm_regulator_get_optional(), as suggested by Mark. > 2. remove the lm90_power_control(), enable the regulator in the probe() > directly, so the codes are more clear, as suggested by Alexander and Guenter. > 3. change the binding documentation, as per Stephen suggestion. > 4. couple of changes, as per previous review. > > Changes from v1: > 1. if get regulator failed, we should continue to run probe function, > not return fail. > 2. call regulator_put() in error handler and remove function. > 3. add LM90 DT binding document. > > Wei Ni (3): > hwmon: (lm90) Add power control > of: add vendor prefix for GMT > Documentation: dt: hwmon: add OF document for LM90 > > Documentation/devicetree/bindings/hwmon/lm90.txt | 44 ++++++++++++++++++++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/hwmon/lm90.c | 19 +++++++++ > 3 files changed, 64 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors