Re: SMSC SIO10n268 Super I/O Linux support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks again,
 
May be I'm new to the Super I/O device, I was just curious to know more info about it, but not found much info on this device support in Linux, though I found some code/patch in Coreboot and lm-sensors.
 
Let me test this device using the UART driver in Linux, and hope it should work.
 
Sreekanth
 
On Sat, Feb 2, 2013 at 9:47 AM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
On Sat, Feb 02, 2013 at 09:31:38AM +0530, Sreekanth W wrote:
> Hi Guenter,
>
Please don't top-post.

> Thanks for your response.
>
> Yes, this Super I/O is not a Sensor.
> But I'm just wondering will it work with the standard Linux 8250 UART
> driver, or any additional driver is required for this device to control
> it's Serial port registers and the Serial port to be functional.
>
Do you have any indication that there is a problem ?

If not, the time to bother about it is if/when it is not working, not beforehand.

Thanks,
Guenter

> Regards,
> Sreekanth
>
> On Sat, Feb 2, 2013 at 12:05 AM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> > On Fri, Feb 01, 2013 at 08:42:56PM +0530, Sreekanth W wrote:
> > > Hello,
> > >
> > > I would like to know whether the SMSC SIO10n268 Super I/O support exist
> > in
> > > the Linux kernel? Does it need a Linux Kernel driver? OR does it work
> > with
> > > the lm-sensors package?
> > >
> > Unless I am missing something, this chip does not have hardware monitoring
> > support, so there won't be a hardware monitoring driver for it.
> >
> > > I'm able to detect the device with "sensors-detect" and "superiotool"
> > > utilities, also able to dump the device registers with "superiotool -d".
> > >
> > > How to configure a UART port connected to this Super IO device? Is there
> > > any other application/tool for this?
> > >
> > Per datasheet: "High Speed NS16C550 Compatible UARTs with Send/Receive
> > 16-Byte FIFOs". It should behave like a standard UART port.
> > Do you have any indication that this is not the case ?
> >
> > Thanks,
> > Guenter
> >

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux