Re: Getting alarms using lm-sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 16, 2012 at 12:16:48AM -0600, Leslie Rhorer wrote:
> Hello, All.
> 
> 	I have been trying to configure lm_sensors to provide alarms for
> failing fans, high temperatures, etc.  I get a reasonable output from the
> sensors command, but when I deliverately create an alarm condition, it does
> not report as an alarm.  For example, I just pulled the fan on the OPT_FAN3
> sensor, and the speed dropped from 1800 RPM to 0, but `sensors` does not
> report any alarm:
> 
> RAID-Server:/usr/share/sensors# sensors
> acpitz-virtual-0
> Adapter: Virtual device
> temp1:       +40.0°C  (crit = +75.0°C)                  
> 
> atk0110-acpi-0
> Adapter: ACPI interface
> Vcore Voltage:      +1.42 V  (min =  +0.85 V, max =  +1.60 V)
> +12V Voltage:      +12.03 V  (min = +10.20 V, max = +13.80 V)
> +5V Voltage:        +4.92 V  (min =  +4.50 V, max =  +5.50 V)
> +3.3V Voltage:      +3.30 V  (min =  +2.97 V, max =  +3.63 V)
> DDR2:               +2.00 V  (min =  +1.71 V, max =  +2.09 V)
> HT:                 +1.28 V  (min =  +1.08 V, max =  +1.32 V)
> SB:                 +1.30 V  (min =  +0.99 V, max =  +1.21 V)
> BR:                 +1.23 V  (min =  +1.08 V, max =  +1.32 V)
> VDDA:               +2.61 V  (min =  +2.25 V, max =  +2.75 V)
> DDR2 TERM.:         +0.98 V  (min =  +0.85 V, max =  +1.04 V)
> VDDNB:              +1.20 V  (min =  +1.17 V, max =  +1.43 V)
> CPU_FAN FAN Speed: 2227 RPM  (min =  800 RPM)
> CHA_FAN1 FAN Speed:2766 RPM  (min =  800 RPM)
> CHA_FAN2 FAN Speed:2766 RPM  (min =  800 RPM)
> OPT_FAN1 FAN Speed:   0 RPM  (min =  800 RPM)
> OPT_FAN2 FAN Speed:   0 RPM  (min =  800 RPM)
> OPT_FAN3 FAN Speed:   0 RPM  (min =  800 RPM)
> PWR_FAN FAN Speed: 1180 RPM  (min =  800 RPM)
> CHA_FAN3 FAN Speed:   0 RPM  (min =  800 RPM)
> CPU Temperature:    +41.0°C  (high = +60.0°C, crit = +95.0°C)  
> MB Temperature:     +45.0°C  (high = +45.0°C, crit = +95.0°C)  
> OPT1:                +0.0°C  (high = +45.0°C, crit = +95.0°C)  
> OPT2:                +0.0°C  (high = +45.0°C, crit = +95.0°C)  
> OPT3:                +0.0°C  (high = +45.0°C, crit = +95.0°C)  
> 
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1:       +32.5°C  (high = +70.0°C, crit = +70.0°C)  

All those drivers don't support alarms.

Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors



[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux