Hello, All. I have been trying to configure lm_sensors to provide alarms for failing fans, high temperatures, etc. I get a reasonable output from the sensors command, but when I deliverately create an alarm condition, it does not report as an alarm. For example, I just pulled the fan on the OPT_FAN3 sensor, and the speed dropped from 1800 RPM to 0, but `sensors` does not report any alarm: RAID-Server:/usr/share/sensors# sensors acpitz-virtual-0 Adapter: Virtual device temp1: +40.0°C (crit = +75.0°C) atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +1.42 V (min = +0.85 V, max = +1.60 V) +12V Voltage: +12.03 V (min = +10.20 V, max = +13.80 V) +5V Voltage: +4.92 V (min = +4.50 V, max = +5.50 V) +3.3V Voltage: +3.30 V (min = +2.97 V, max = +3.63 V) DDR2: +2.00 V (min = +1.71 V, max = +2.09 V) HT: +1.28 V (min = +1.08 V, max = +1.32 V) SB: +1.30 V (min = +0.99 V, max = +1.21 V) BR: +1.23 V (min = +1.08 V, max = +1.32 V) VDDA: +2.61 V (min = +2.25 V, max = +2.75 V) DDR2 TERM.: +0.98 V (min = +0.85 V, max = +1.04 V) VDDNB: +1.20 V (min = +1.17 V, max = +1.43 V) CPU_FAN FAN Speed: 2227 RPM (min = 800 RPM) CHA_FAN1 FAN Speed:2766 RPM (min = 800 RPM) CHA_FAN2 FAN Speed:2766 RPM (min = 800 RPM) OPT_FAN1 FAN Speed: 0 RPM (min = 800 RPM) OPT_FAN2 FAN Speed: 0 RPM (min = 800 RPM) OPT_FAN3 FAN Speed: 0 RPM (min = 800 RPM) PWR_FAN FAN Speed: 1180 RPM (min = 800 RPM) CHA_FAN3 FAN Speed: 0 RPM (min = 800 RPM) CPU Temperature: +41.0°C (high = +60.0°C, crit = +95.0°C) MB Temperature: +45.0°C (high = +45.0°C, crit = +95.0°C) OPT1: +0.0°C (high = +45.0°C, crit = +95.0°C) OPT2: +0.0°C (high = +45.0°C, crit = +95.0°C) OPT3: +0.0°C (high = +45.0°C, crit = +95.0°C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +32.5°C (high = +70.0°C, crit = +70.0°C)
<<attachment: winmail.dat>>
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
