> -----Original Message----- > From: Guenter Roeck [mailto:linux@xxxxxxxxxxxx] > Sent: Friday, November 16, 2012 12:37 AM > To: Leslie Rhorer > Cc: lm-sensors@xxxxxxxxxxxxxx > Subject: Re: Getting alarms using lm-sensors > > On Fri, Nov 16, 2012 at 12:16:48AM -0600, Leslie Rhorer wrote: > > Hello, All. > > > > I have been trying to configure lm_sensors to provide alarms for > > failing fans, high temperatures, etc. I get a reasonable output from > the > > sensors command, but when I deliverately create an alarm condition, it > does > > not report as an alarm. For example, I just pulled the fan on the > OPT_FAN3 > > sensor, and the speed dropped from 1800 RPM to 0, but `sensors` does not > > report any alarm: > > > > RAID-Server:/usr/share/sensors# sensors > > acpitz-virtual-0 > > Adapter: Virtual device > > temp1: +40.0°C (crit = +75.0°C) > > > > atk0110-acpi-0 > > Adapter: ACPI interface > > Vcore Voltage: +1.42 V (min = +0.85 V, max = +1.60 V) > > +12V Voltage: +12.03 V (min = +10.20 V, max = +13.80 V) > > +5V Voltage: +4.92 V (min = +4.50 V, max = +5.50 V) > > +3.3V Voltage: +3.30 V (min = +2.97 V, max = +3.63 V) > > DDR2: +2.00 V (min = +1.71 V, max = +2.09 V) > > HT: +1.28 V (min = +1.08 V, max = +1.32 V) > > SB: +1.30 V (min = +0.99 V, max = +1.21 V) > > BR: +1.23 V (min = +1.08 V, max = +1.32 V) > > VDDA: +2.61 V (min = +2.25 V, max = +2.75 V) > > DDR2 TERM.: +0.98 V (min = +0.85 V, max = +1.04 V) > > VDDNB: +1.20 V (min = +1.17 V, max = +1.43 V) > > CPU_FAN FAN Speed: 2227 RPM (min = 800 RPM) > > CHA_FAN1 FAN Speed:2766 RPM (min = 800 RPM) > > CHA_FAN2 FAN Speed:2766 RPM (min = 800 RPM) > > OPT_FAN1 FAN Speed: 0 RPM (min = 800 RPM) > > OPT_FAN2 FAN Speed: 0 RPM (min = 800 RPM) > > OPT_FAN3 FAN Speed: 0 RPM (min = 800 RPM) > > PWR_FAN FAN Speed: 1180 RPM (min = 800 RPM) > > CHA_FAN3 FAN Speed: 0 RPM (min = 800 RPM) > > CPU Temperature: +41.0°C (high = +60.0°C, crit = +95.0°C) > > MB Temperature: +45.0°C (high = +45.0°C, crit = +95.0°C) > > OPT1: +0.0°C (high = +45.0°C, crit = +95.0°C) > > OPT2: +0.0°C (high = +45.0°C, crit = +95.0°C) > > OPT3: +0.0°C (high = +45.0°C, crit = +95.0°C) > > > > k10temp-pci-00c3 > > Adapter: PCI adapter > > temp1: +32.5°C (high = +70.0°C, crit = +70.0°C) > > All those drivers don't support alarms. > > Guenter Oi. Thanks, anyway. Well, OK, then. I've started working on a cron script that will send e-mails when a parameter falls out of bounds or shut down the shelf if it is critical, so on a related note, what sensors, exactly, are acpitz-virtual-0 and k10temp-pci-00c3? It's very nice they are in bounds, but if they should drift out of bounds, what should I believe is getting too hot? _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
