Le 14/05/2012 20:57, Jean Delvare a écrit :
On Mon, 14 May 2012 20:44:08 +0200, ACCART Julien wrote:
The BIOS of this motherboard can display CPU and M/B temp, voltage, fan
speed.
Do you think we can use the asus wmi modules to read these data?
How can I help?
Did you try just running sensors-detect and loading the proper drivers?
Who knows, this may just work. If not, booting with
acpi_enforce_resources=lax might be a workaround if you can live with
the risk.
Yes I did.
In kernel 3, loading the w83627ehf fails because of conflicts with ACPI.
I tried the acp_enforce_resources=lax but I had freezes. It is useless
to have the module loading ability if system freezes
So, I'm back to 2.6.39 which lets me load w83627ehf module.
I wanted the atk (or wmi) because of two reasons :
1 - w83627ehf doesn't work with kernel 3 and lax acpi resource freezes
my system as I said
2 - mesures with atk or wmi are reliable but are messed up with
w83627ehf module
For example :
$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +33.0 C (high = +82.0 C, crit = +102.0 C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +29.0 C (high = +82.0 C, crit = +102.0 C)
nct6776-isa-0290
Adapter: ISA adapter
in0: +0.90 V (min = +0.00 V, max = +1.74 V)
in1: +1.00 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.38 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.38 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +2.04 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 967 RPM (min = 0 RPM) ALARM
fan2: 1045 RPM (min = 0 RPM) ALARM
fan3: 0 RPM (min = 0 RPM) ALARM
fan4: 1086 RPM (min = 0 RPM) ALARM
fan5: 0 RPM (min = 0 RPM) ALARM
SYSTIN: +29.0 C (high = +0.0 C, hyst = +0.0 C) ALARM sensor =
thermistor
CPUTIN: +91.5 C (high = +58.5 C, hyst = +53.5 C) ALARM sensor =
thermistor
AUXTIN: +26.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor
PECI Agent 0: +19.5 C
cpu0_vid: +2.050 V
Coretemp says 30 C while w83627ehf says 91.5.
min and max are not set in both temp, voltage and RPM.
--
Julien
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
