On Fri, Mar 02, 2012 at 03:06:26AM -0500, Jean Delvare wrote: > Guenter Roeck wrote: > > I added your request to the "supported devices" list on lm-sensors.org. > > And I added detection of this chip (and other IT878xF chips) to > sensors-detect. I had the patch pending for weeks, it was about time > that I committed it. > > On Wed, 29 Feb 2012 13:42:55 -0500, Kevin Folz wrote: > > Thanks for the suggestion of "force-id" module parameter, I picked 8726 as it’s the highest model number reported by "modinfo it87" on my kernel. > > Note that the IT8726F is an old chip, despite the high number. It's a > modified IT8716F chip with just one extra feature (AMD power > sequencing.) The IT8720F is the latest 5V chip with 4V ADC (16 mV/bit.) > Starting with the IT8721F, chips are powered with 3.3V and have a 3V > ADC (12 mV/bit.) > > Unfortunately the IT8783F can be powered with either 3.3V or 5V > according to the scarce documentation I have, so it's difficult to tell > whether it is more like the IT8720F or more like the IT8721F. Or maybe > it's like neither and will need dedicated code, it's impossible to say > without a datasheet. > FWIW, I sent a request for datasheets to ITE, but they ignored it. Kevin, any success on your side ? Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
