Hi Mathieu, Please don't top-post. On Tue, 9 Aug 2011 22:29:58 -0400, Mathieu Jobin wrote: > Here is what I get running kernel 3.0 rc6 > > Now follows a summary of the probes I have just done. > Just press ENTER to continue: > > Driver `to-be-written': > * ISA bus, address 0x600 > Chip `Fintek F71889E Super IO Sensors' (confidence: 9) Was this with the latest version of sensors-detect, as Hans instructed? I doubt it. Please try again with: http://dl.lm-sensors.org/lm-sensors/files/sensors-detect Note though, that this doesn't prevent you from loading the f71882fg driver manually to see if it works. > Driver `k10temp' (autoloaded): > * Chip `AMD Family 10h thermal sensors' (confidence: 9) > > Note: there is no driver for Fintek F71889E Super IO Sensors yet. > Check http://www.lm-sensors.org/wiki/Devices for updates. > > No modules to load, skipping modules configuration. > > Unloading i2c-dev... OK > Unloading cpuid... OK -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
