Here is what I get running kernel 3.0 rc6
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `to-be-written':
* ISA bus, address 0x600
Chip `Fintek F71889E Super IO Sensors' (confidence: 9)
Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)
Note: there is no driver for Fintek F71889E Super IO Sensors yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.
No modules to load, skipping modules configuration.
Unloading i2c-dev... OK
Unloading cpuid... OK
On 2011-07-30, at 03:44 , Hans de Goede wrote:
> Hi,
>
> On 07/30/2011 06:58 AM, Mathieu Jobin wrote:
>> following the thread http://comments.gmane.org/gmane.linux.drivers.sensors/22652
>>
>> any update on this?
>>
>
> Yes, see:
> http://www.lm-sensors.org/wiki/Devices
>
> The F71889ED is supported in kernel-2.6.39 and later, and
> detected by the latest sensors-detect version.
>
> Regards,
>
> Hans
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
