sensors.conf for Sapphire Pure Fusion Mini E350 motherboard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
I just wanted to contribute my sensors.conf for the Sapphire Pure Fusion 
Mini E350 motherboard. I'm quite confident about the accuracy of the 
config, I spent a fair amount of time verifying each bit.
I also posted this here:
http://scientificlinuxforum.org/index.php?showtopic=415

#----------------------------------
# lm-sensors config for Sapphire Pure Fusion Mini E350 board

chip "f71808e-*"

   label  in0  "VCC  +3.3V"
   # E-350 Vcore range is ~ 0.5V-1.35V (lowest idle state to max load)
   label  in1  "CPU  Vcore"
   ignore in2
   label  in3  "DDR3 VDIMM"
   label  in4  "FCH  +1.1V"
   label  in5  "PCIe +1.8V"
   label  in7  "3VSB +3.3V"
   label  in8  "VBAT +3.0V"

   compute in0  @*2, @/2
   compute in3 (@ * 1.465), (@ / 1.465)
   compute in7  @*2, @/2
   compute in8  @*2, @/2

   label fan1 "CPU Fan"
   label fan2 "SYS Fan"

   ignore fan3

   label  temp1 "SYS Temp1"
   label  temp2 "SYS Temp2"

chip "k10temp-*"

  label temp1 "CPU Temp"

#-----------------------------------------------


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux