First a big thanks to Guenter Roeck for helping me (allot) to cleanup this driver v3 -> v4: * Removed "data->valid = 0;" (missed that in v3 ;) * only read the limits once * changed the temp_input and temp_high as suggested by Guenter, also changed the functions/macros related to that change
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with Overtemperature Alarm from Maxim. Signed-off-by: Per Dalen <per.dalen@xxxxxxxxxxxx> --- diff --git a/Documentation/hwmon/max6642 b/Documentation/hwmon/max6642 new file mode 100644 index 0000000..afbd3e4 --- /dev/null +++ b/Documentation/hwmon/max6642 @@ -0,0 +1,21 @@ +Kernel driver max6642 +===================== + +Supported chips: + * Maxim MAX6642 + Prefix: 'max6642' + Addresses scanned: I2C 0x48-0x4f + Datasheet: Publicly available at the Maxim website + http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf + +Authors: + Per Dalen <per.dalen@xxxxxxxxxxxx> + +Description +----------- + +The MAX6642 is a digital temperature sensor. It senses its own temperature as +well as the temperature on one external diode. + +All temperature values are given in degrees Celsius. Resolution +is 0.25 degree for the local temperature and for the remote temperature. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 060ef63..e9a3d7a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -728,6 +728,17 @@ config SENSORS_MAX6639 This driver can also be built as a module. If so, the module will be called max6639. +config SENSORS_MAX6642 + tristate "Maxim MAX6642 sensor chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for MAX6642 sensor chip. + MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor + with Overtemperature Alarm from Maxim. + + This driver can also be built as a module. If so, the module + will be called max6642. + config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 967d0ea..2211752 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -85,6 +85,7 @@ obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o obj-$(CONFIG_SENSORS_MAX1111) += max1111.o obj-$(CONFIG_SENSORS_MAX1619) += max1619.o obj-$(CONFIG_SENSORS_MAX6639) += max6639.o +obj-$(CONFIG_SENSORS_MAX6642) += max6642.o obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c new file mode 100644 index 0000000..7422351 --- /dev/null +++ b/drivers/hwmon/max6642.c @@ -0,0 +1,359 @@ +/* + * Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature Sensor + * with Overtemperature Alarm + * + * Copyright (C) 2011 AppearTV AS + * + * Derived from: + * + * Based on the max1619 driver. + * Copyright (C) 2003-2004 Alexey Fisher <fishor@xxxxxxx> + * Jean Delvare <khali@xxxxxxxxxxxx> + * + * The MAX6642 is a sensor chip made by Maxim. + * It reports up to two temperatures (its own plus up to + * one external one). Complete datasheet can be + * obtained from Maxim's website at: + * http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> + +static const unsigned short normal_i2c[] = { + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; + +/* + * The MAX6642 registers + */ + +#define MAX6642_REG_R_MAN_ID 0xFE +#define MAX6642_REG_R_CONFIG 0x03 +#define MAX6642_REG_W_CONFIG 0x09 +#define MAX6642_REG_R_STATUS 0x02 +#define MAX6642_REG_R_LOCAL_TEMP 0x00 +#define MAX6642_REG_R_LOCAL_TEMPL 0x11 +#define MAX6642_REG_R_LOCAL_HIGH 0x05 +#define MAX6642_REG_W_LOCAL_HIGH 0x0B +#define MAX6642_REG_R_REMOTE_TEMP 0x01 +#define MAX6642_REG_R_REMOTE_TEMPL 0x10 +#define MAX6642_REG_R_REMOTE_HIGH 0x07 +#define MAX6642_REG_W_REMOTE_HIGH 0x0D + +/* + * Conversions + */ + +static int temp_from_reg10(int val) +{ + return val * 250; +} + +static int temp_from_reg(int val) +{ + return val * 1000; +} + +static int temp_to_reg(int val) +{ + return val / 1000; +} + +/* + * Client data (each client gets its own) + */ + +struct max6642_data { + struct device *hwmon_dev; + struct mutex update_lock; + bool valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + u16 temp_input[2]; /* local/remote */ + u16 temp_high[2]; /* local/remote */ + u8 alarms; +}; + +/* + * Real code + */ + +static void max6642_init_client(struct i2c_client *client) +{ + u8 config; + struct max6642_data *data = i2c_get_clientdata(client); + + /* + * Start the conversions. + */ + config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); + if (config & 0x40) + i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG, + config & 0xBF); /* run */ + + data->temp_high[0] = i2c_smbus_read_byte_data(client, + MAX6642_REG_R_LOCAL_HIGH); + data->temp_high[1] = i2c_smbus_read_byte_data(client, + MAX6642_REG_R_REMOTE_HIGH); +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max6642_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + u8 reg_config, reg_status, man_id; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + /* identification */ + man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID); + if (man_id != 0x4D) + return -ENODEV; + + /* + * We read the config and status register, the 4 lower bits in the + * config register should be zero and bit 5, 3, 1 and 0 should be + * zero in the status register. + */ + reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); + reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS); + if (((reg_config & 0x0f) != 0x00) || + ((reg_status & 0x2b) != 0x00)) + return -ENODEV; + + strlcpy(info->type, "max6642", I2C_NAME_SIZE); + + return 0; +} + +static struct max6642_data *max6642_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct max6642_data *data = i2c_get_clientdata(client); + u16 val, tmp; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ * 8) || !data->valid) { + dev_dbg(&client->dev, "Updating max6642 data.\n"); + val = i2c_smbus_read_byte_data(client, + MAX6642_REG_R_LOCAL_TEMPL); + tmp = (val >> 6) & 3; + val = i2c_smbus_read_byte_data(client, + MAX6642_REG_R_LOCAL_TEMP); + val = (val << 2) | tmp; + data->temp_input[0] = val; + val = i2c_smbus_read_byte_data(client, + MAX6642_REG_R_REMOTE_TEMPL); + tmp = (val >> 6) & 3; + val = i2c_smbus_read_byte_data(client, + MAX6642_REG_R_REMOTE_TEMP); + val = (val << 2) | tmp; + data->temp_input[1] = val; + data->alarms = i2c_smbus_read_byte_data(client, + MAX6642_REG_R_STATUS); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* + * Sysfs stuff + */ + +static ssize_t show_temp_max10(struct device *dev, + struct device_attribute *dev_attr, char *buf) +{ + struct max6642_data *data = max6642_update_device(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", + temp_from_reg10(data->temp_input[attr->index])); +} + +static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct max6642_data *data = max6642_update_device(dev); + struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); + + return sprintf(buf, "%d\n", temp_from_reg(data->temp_high[attr2->nr])); +} + +static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long val; + int err; + struct i2c_client *client = to_i2c_client(dev); + struct max6642_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); + + err = strict_strtoul(buf, 10, &val); + if (err < 0) + return err; + + mutex_lock(&data->update_lock); + data->temp_high[attr2->nr] = SENSORS_LIMIT(temp_to_reg(val), 0, 255); + i2c_smbus_write_byte_data(client, attr2->index, + data->temp_high[attr2->nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct max6642_data *data = max6642_update_device(dev); + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_max10, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_max10, NULL, 1); +static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0, MAX6642_REG_W_LOCAL_HIGH); +static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1, MAX6642_REG_W_REMOTE_HIGH); +static SENSOR_DEVICE_ATTR(temp_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); + +static struct attribute *max6642_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + + &sensor_dev_attr_temp_fault.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group max6642_group = { + .attrs = max6642_attributes, +}; + +static int max6642_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct max6642_data *data; + int err; + + data = kzalloc(sizeof(struct max6642_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); + mutex_init(&data->update_lock); + + /* Initialize the MAX6642 chip */ + max6642_init_client(new_client); + + /* Register sysfs hooks */ + err = sysfs_create_group(&new_client->dev.kobj, &max6642_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove_files; + } + + return 0; + +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &max6642_group); +exit_free: + kfree(data); +exit: + return err; +} + +static int max6642_remove(struct i2c_client *client) +{ + struct max6642_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &max6642_group); + + kfree(data); + return 0; +} + +/* + * Driver data (common to all clients) + */ + +static const struct i2c_device_id max6642_id[] = { + { "max6642", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max6642_id); + +static struct i2c_driver max6642_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "max6642", + }, + .probe = max6642_probe, + .remove = max6642_remove, + .id_table = max6642_id, + .detect = max6642_detect, + .address_list = normal_i2c, +}; + +static int __init max6642_init(void) +{ + return i2c_add_driver(&max6642_driver); +} + +static void __exit max6642_exit(void) +{ + i2c_del_driver(&max6642_driver); +} + +MODULE_AUTHOR("Per Dalen <per.dalen@xxxxxxxxxxxx>"); +MODULE_DESCRIPTION("MAX6642 sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(max6642_init); +module_exit(max6642_exit);
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
