Hi Per, On Fri, Apr 01, 2011 at 04:21:05AM -0400, Per Dalén wrote: > MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with > Overtemperature Alarm from Maxim. > > Signed-off-by: Per Dalen <per.dalen@xxxxxxxxxxxx> > > --- It would be helpful if you added version information here, showing what exactly was changed from one version to another. > diff --git a/Documentation/hwmon/max6642 b/Documentation/hwmon/max6642 > new file mode 100644 > index 0000000..afbd3e4 > --- /dev/null > +++ b/Documentation/hwmon/max6642 > @@ -0,0 +1,21 @@ > +Kernel driver max6642 > +===================== > + > +Supported chips: > + * Maxim MAX6642 > + Prefix: 'max6642' > + Addresses scanned: I2C 0x48-0x4f > + Datasheet: Publicly available at the Maxim website > + http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf > + > +Authors: > + Per Dalen <per.dalen@xxxxxxxxxxxx> > + > +Description > +----------- > + > +The MAX6642 is a digital temperature sensor. It senses its own > temperature as First time around I thought it is our mailer screwing up again, but apparently it is yours. Please make sure your mailer doesn't split lines when you send out patches. > +well as the temperature on one external diode. > + > +All temperature values are given in degrees Celsius. Resolution > +is 0.25 degree for the local temperature and for the remote temperature. > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 060ef63..660d031 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -728,6 +728,15 @@ config SENSORS_MAX6639 > This driver can also be built as a module. If so, the module > will be called max6639. > > +config SENSORS_MAX6642 > + tristate "Maxim MAX6642 sensor chip" > + depends on I2C You might want to add "&& EXPERIMENTAL" here for a while. > + help > + If you say yes here you get support for MAX6642 sensor chip. > + > + This driver can also be built as a module. If so, the module > + will be called max6642. > + checkpatch complains about insufficient documentation and wants to see a full paragraph. A bit excessive in my opinion, but maybe you can add that it is a temperature sensor with one internal and one external sensor to make checkpatch happy. > config SENSORS_MAX6650 > tristate "Maxim MAX6650 sensor chip" > depends on I2C && EXPERIMENTAL > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 967d0ea..2211752 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -85,6 +85,7 @@ obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o > obj-$(CONFIG_SENSORS_MAX1111) += max1111.o > obj-$(CONFIG_SENSORS_MAX1619) += max1619.o > obj-$(CONFIG_SENSORS_MAX6639) += max6639.o > +obj-$(CONFIG_SENSORS_MAX6642) += max6642.o > obj-$(CONFIG_SENSORS_MAX6650) += max6650.o > obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o > obj-$(CONFIG_SENSORS_PC87360) += pc87360.o > diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c > new file mode 100644 > index 0000000..c7739b8 > --- /dev/null > +++ b/drivers/hwmon/max6642.c > @@ -0,0 +1,372 @@ > +/* > + * Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature > Sensor > + * with Overtemperature Alarm > + * > + * Copyright (C) 2011 AppearTV AS > + * > + * Derived from: > + * > + * Based on the max1619 driver. > + * Copyright (C) 2003-2004 Alexey Fisher <fishor@xxxxxxx> > + * Jean Delvare <khali@xxxxxxxxxxxx> > + * > + * The MAX6642 is a sensor chip made by Maxim. > + * It reports up to two temperatures (its own plus up to > + * one external one). Complete datasheet can be > + * obtained from Maxim's website at: > + * http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + > + > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/slab.h> > +#include <linux/jiffies.h> > +#include <linux/i2c.h> > +#include <linux/hwmon.h> > +#include <linux/hwmon-sysfs.h> > +#include <linux/err.h> > +#include <linux/mutex.h> > +#include <linux/sysfs.h> > + > +static const unsigned short normal_i2c[] = { > + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; > + > +/* > + * The MAX6642 registers > + */ > + > +#define MAX6642_REG_R_MAN_ID 0xFE > +#define MAX6642_REG_R_CONFIG 0x03 > +#define MAX6642_REG_W_CONFIG 0x09 > +#define MAX6642_REG_R_STATUS 0x02 > +#define MAX6642_REG_R_LOCAL_TEMP 0x00 > +#define MAX6642_REG_R_LOCAL_TEMPL 0x11 > +#define MAX6642_REG_R_LOCAL_HIGH 0x05 > +#define MAX6642_REG_W_LOCAL_HIGH 0x0B > +#define MAX6642_REG_R_REMOTE_TEMP 0x01 > +#define MAX6642_REG_R_REMOTE_TEMPL 0x10 > +#define MAX6642_REG_R_REMOTE_HIGH 0x07 > +#define MAX6642_REG_W_REMOTE_HIGH 0x0D > + > +/* > + * Conversions > + */ > + > +static int temp_from_reg10(int val) > +{ > + return val * 250; > +} > + > +static int temp_from_reg(int val) > +{ > + return val * 1000; > +} > + > +static int temp_to_reg(int val) > +{ > + return val / 1000; > +} > + > +/* > + * Client data (each client gets its own) > + */ > + > +struct max6642_data { > + struct device *hwmon_dev; > + struct mutex update_lock; > + bool valid; /* zero until following fields are valid */ > + unsigned long last_updated; /* in jiffies */ > + > + /* registers values */ > + u16 temp_input1; /* local */ > + u16 temp_high1; /* local */ > + u16 temp_input2; /* remote */ > + u16 temp_high2; /* remote */ > + u8 alarms; > +}; > + > +/* > + * Real code > + */ > + > +static void max6642_init_client(struct i2c_client *client) > +{ > + u8 config; > + > + /* > + * Start the conversions. > + */ > + config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); > + if (config & 0x40) > + i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG, > + config & 0xBF); /* run */ > +} > + > +/* Return 0 if detection is successful, -ENODEV otherwise */ > +static int max6642_detect(struct i2c_client *client, > + struct i2c_board_info *info) > +{ > + struct i2c_adapter *adapter = client->adapter; > + u8 reg_config, reg_status, man_id; > + > + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) > + return -ENODEV; > + > + /* identification */ > + man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID); > + if (man_id != 0x4D) { > + dev_info(&adapter->dev, > + "Unsupported chip (man_id=0x%02X).\n", > + man_id); Please, no messages like that in detect functions. > + return -ENODEV; > + } > + > + /* detection */ > + reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); > + reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS); > + if (((reg_config & 0x0f) != 0x00) && > + ((reg_status & 0x2b) != 0x00)) { This won't work. First, it should be ||, not &&. Second, other Maxim sensors have the lower nibble of reg_config not implemented, causing it to return the same value as previously read (in this case, it would be 0x0d from man_id). I don't know if this chip does the same, but it is at least possible (even though the datasheet says it should be 0000). > + dev_dbg(&adapter->dev, "MAX6642 detection failed at 0x%02x\n", > + client->addr); Please remove this message entirely. Keep in mind that if every chip would do this, we would have a lot of noise in the system (even if for debugging only). > + return -ENODEV; > + } > + > + strlcpy(info->type, "max6642", I2C_NAME_SIZE); > + > + return 0; > +} > + > +static struct max6642_data *max6642_update_device(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct max6642_data *data = i2c_get_clientdata(client); > + u16 val, tmp; > + > + mutex_lock(&data->update_lock); > + > + if (time_after(jiffies, data->last_updated + HZ * 8) || !data->valid) { > + dev_dbg(&client->dev, "Updating max6642 data.\n"); > + val = i2c_smbus_read_byte_data(client, > + MAX6642_REG_R_LOCAL_TEMPL); > + tmp = (val >> 6) & 3; > + val = i2c_smbus_read_byte_data(client, > + MAX6642_REG_R_LOCAL_TEMP); > + val = (val << 2) | tmp; > + data->temp_input1 = val; > + val = i2c_smbus_read_byte_data(client, > + MAX6642_REG_R_REMOTE_TEMPL); > + tmp = (val >> 6) & 3; > + val = i2c_smbus_read_byte_data(client, > + MAX6642_REG_R_REMOTE_TEMP); > + val = (val << 2) | tmp; > + data->temp_input2 = val; > + data->temp_high1 = i2c_smbus_read_byte_data(client, > + MAX6642_REG_R_LOCAL_HIGH); > + data->temp_high2 = i2c_smbus_read_byte_data(client, > + MAX6642_REG_R_REMOTE_HIGH); > + data->alarms = i2c_smbus_read_byte_data(client, > + MAX6642_REG_R_STATUS); > + > + data->last_updated = jiffies; > + data->valid = 1; > + } > + > + mutex_unlock(&data->update_lock); > + > + return data; > +} > + > +/* > + * Sysfs stuff > + */ > + > +#define show_temp10(value) \ > +static ssize_t show10_##value(struct device *dev, \ > + struct device_attribute *attr, char *buf) \ > +{ \ > + struct max6642_data *data = max6642_update_device(dev); \ > + return sprintf(buf, "%d\n", temp_from_reg10(data->value)); \ > +} > + > +show_temp10(temp_input1); > +show_temp10(temp_input2); > + > +#define show_temp(value) \ > +static ssize_t show_##value(struct device *dev, struct device_attribute > *attr, \ > + char *buf) \ > +{ \ > + struct max6642_data *data = max6642_update_device(dev); \ > + return sprintf(buf, "%d\n", temp_from_reg(data->value)); \ > +} > + > +show_temp(temp_high1); > +show_temp(temp_high2); > + > +#define set_temp(value, reg) \ > +static ssize_t set_##value(struct device *dev, struct device_attribute > *attr, \ > + const char *buf, size_t count) \ > +{ \ > + long val, err; \ > + struct i2c_client *client = to_i2c_client(dev); \ > + struct max6642_data *data = i2c_get_clientdata(client); \ > + err = strict_strtol(buf, 10, &val); \ > + if (err < 0) \ > + return err; \ > +\ Location of '\' is a bit odd here. Please always use a single blank before the '\' (or place all of them into the same column, your call). Also, you don't really need a blank line in a macro. > + mutex_lock(&data->update_lock); \ > + data->value = temp_to_reg(val); \ > + i2c_smbus_write_byte_data(client, reg, data->value); \ > + mutex_unlock(&data->update_lock); \ > + return count; \ > +} > + > +set_temp(temp_high1, MAX6642_REG_W_LOCAL_HIGH); > +set_temp(temp_high2, MAX6642_REG_W_REMOTE_HIGH); > + > +static ssize_t show_alarms(struct device *dev, struct device_attribute > *attr, Split line again. There are actually several of those. Note that the _alarms attribute is deprecated; you don't need it (and should not have it) in new drivers. > + char *buf) > +{ > + struct max6642_data *data = max6642_update_device(dev); > + return sprintf(buf, "%d\n", data->alarms); > +} > + > +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + int bitnr = to_sensor_dev_attr(attr)->index; > + struct max6642_data *data = max6642_update_device(dev); > + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); > +} > + > +static DEVICE_ATTR(temp1_input, S_IRUGO, show10_temp_input1, NULL); > +static DEVICE_ATTR(temp2_input, S_IRUGO, show10_temp_input2, NULL); > +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1, > + set_temp_high1); > +static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, > + set_temp_high2); > +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); > +static SENSOR_DEVICE_ATTR(temp_fault, S_IRUGO, show_alarm, NULL, 2); > +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); > +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); > + > +static struct attribute *max6642_attributes[] = { > + &dev_attr_temp1_input.attr, > + &dev_attr_temp2_input.attr, > + &dev_attr_temp1_max.attr, > + &dev_attr_temp2_max.attr, > + > + &dev_attr_alarms.attr, The alarms attribute is deprecated and not needed in new drivers. > + &sensor_dev_attr_temp_fault.dev_attr.attr, > + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, > + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, > + NULL > +}; > + > +static const struct attribute_group max6642_group = { > + .attrs = max6642_attributes, > +}; > + > +static int max6642_probe(struct i2c_client *new_client, > + const struct i2c_device_id *id) > +{ > + struct max6642_data *data; > + int err; > + > + data = kzalloc(sizeof(struct max6642_data), GFP_KERNEL); > + if (!data) { > + err = -ENOMEM; > + goto exit; > + } > + > + i2c_set_clientdata(new_client, data); > + data->valid = 0; > + mutex_init(&data->update_lock); > + > + /* Initialize the MAX6642 chip */ > + max6642_init_client(new_client); > + > + /* Register sysfs hooks */ > + err = sysfs_create_group(&new_client->dev.kobj, &max6642_group); > + if (err) > + goto exit_free; > + > + data->hwmon_dev = hwmon_device_register(&new_client->dev); > + if (IS_ERR(data->hwmon_dev)) { > + err = PTR_ERR(data->hwmon_dev); > + goto exit_remove_files; > + } > + > + return 0; > + > +exit_remove_files: > + sysfs_remove_group(&new_client->dev.kobj, &max6642_group); > +exit_free: > + kfree(data); > +exit: > + return err; > +} > + > +static int max6642_remove(struct i2c_client *client) > +{ > + struct max6642_data *data = i2c_get_clientdata(client); > + > + hwmon_device_unregister(data->hwmon_dev); > + sysfs_remove_group(&client->dev.kobj, &max6642_group); > + > + kfree(data); > + return 0; > +} > + > +/* > + * Driver data (common to all clients) > + */ > + > +static const struct i2c_device_id max6642_id[] = { > + { "max6642", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, max6642_id); > + > +static struct i2c_driver max6642_driver = { > + .class = I2C_CLASS_HWMON, > + .driver = { > + .name = "max6642", > + }, > + .probe = max6642_probe, > + .remove = max6642_remove, > + .id_table = max6642_id, > + .detect = max6642_detect, > + .address_list = normal_i2c, > +}; > + > +static int __init sensors_max6642_init(void) > +{ > + return i2c_add_driver(&max6642_driver); > +} > + > +static void __exit sensors_max6642_exit(void) > +{ The sensors_ prefix here and above is unnecessary and inconsistent with the rest of the code. Please remove. > + i2c_del_driver(&max6642_driver); > +} > + > +MODULE_AUTHOR("Per Dalen <per.dalen@xxxxxxxxxxxx>"); > +MODULE_DESCRIPTION("MAX6642 sensor driver"); > +MODULE_LICENSE("GPL"); > + > +module_init(sensors_max6642_init); > +module_exit(sensors_max6642_exit); > > > > _______________________________________________ > lm-sensors mailing list > lm-sensors@xxxxxxxxxxxxxx > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
