On Wed, 2011-02-23 at 13:33 -0500, Phillip Susi wrote: > On 2/23/2011 11:22 AM, Guenter Roeck wrote: > > Difficult to imagine that two fans would show spinning if only one does. > > I would think that if you drop pwm2 down to 0 (and of course set its > > mode to manual) should result in fan2 speed dropping, and CPU > > temperature to go up. > > > > This actually leads to the next question: What temperature changes do > > you see after playing with pwm settings ? If the CPU fan is affected, I > > would think that CPU temperature should go up pretty fast. > > It turns out that the cpu fan refuses to stop. It seems to have a > minimum speed of around 1000 rpm ( max: 2000 ) and is controlled by > pwm2. pwm1 controls both sysfans, and pwm3 does nothing. The pwrfan > can not be controlled. Ok, that pretty much matches the information in the board manual. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
