The following patch series adds support for NCT6775F and NCT6776F to the
w83627ehf driver. It also includes some cleanup and adds support for
the fourth temperature sensor on W83677HG-B.
v4:
- Store rpm instead of raw fan speed readings
- For NCT6775F, increase fan divisor if the fan speed reads 0
[ On NCT6775F, fan speed readings can return 0 instead of 0xff if the
fan divisor value is too low ]
- Separate changes into more patches to simplify review
v3:
- Documentation: Remove references to datasheets which no longer exist
- Documentation: Add information about limits of SmartFan IV support.
- SmartFan III mode is not supported on NCT6776F, so remove related attributes
and refuse to configure it.
- (additional patch) Improve support for chips with 16-bit fan count registers
v2:
- W83677HG-B does share the AUXTIN/VIN3 pin, so we can not skip this check.
- Cosmetic changes to fix a couple of checkpatch errors and to undo some
unnecessary formatting changes in patch 5.
- Patch 1 introduced a bug in temp_to_reg which was fixed in a later patch.
Modified code to not introduce the bug in the first place.
- Two dev_dbg messages were changed to dev_info for testing. Changed back
to dev_dbg.
The patched driver can be downloaded as stand-alone driver from
http://www.roeck-us.net/linux/drivers/w83627ehf/
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
