On Sat, 11 Dec 2010 04:16:07 -0600 (CST), Jeff Rickman wrote: > Please look at the "min" and "max" values for "in7". They look reversed. > > [root@anas-01 ~]# sensors > sch5127-isa-0870 > Adapter: ISA adapter > in0: +1.78 V (min = +0.00 V, max = +3.32 V) > Vccp: +1.19 V (min = +1.08 V, max = +1.32 V) > VCC: +3.31 V (min = +2.97 V, max = +3.63 V) > in3: +1.13 V (min = +0.00 V, max = +1.49 V) > in4: +1.48 V (min = +0.00 V, max = +1.49 V) > VTR: +3.33 V (min = +2.97 V, max = +3.63 V) > VBAT: +3.24 V (min = +2.70 V, max = +3.30 V) > in7: +0.72 V (min = +1.99 V, max = +1.75 V) > Side Fan: 1863 RPM (min = 700 RPM) > MCH Fan: 5023 RPM (min = 4500 RPM) > CPU Temp: +39.9°C (low = +20.0°C, high = +60.0°C) > SYS Temp: +32.4°C (low = +20.0°C, high = +60.0°C) The in7 limit values are probably simply not initialized by the BIOS. At least the in7_max value differs from your previous post. I admit the in7_min limit is surprising, as it didn't change and corresponds to the max value (register value 0xff), which would make sense for a max limit but not for a min limit. But even more surprising is that the alarm flag doesn't show even though the reading is below the min limit. There's something fishy here. You should check if you can change the limits and if you are able to get the alarm flag to trigger. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
