On Thu, Sep 16, 2010 at 04:48:59AM -0400, Jean Delvare wrote: > On Wed, 15 Sep 2010 18:52:29 -0700, Guenter Roeck wrote: > > Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> > > --- > > Documentation/hwmon/lm90 | 9 +++-- > > Documentation/hwmon/sysfs-interface | 7 ++++ > > drivers/hwmon/lm90.c | 65 +++++++++++++++++++++++++++++++--- > > 3 files changed, 71 insertions(+), 10 deletions(-) > > (...) > > diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface > > index 22843cb..4c73f3d 100644 > > --- a/Documentation/hwmon/sysfs-interface > > +++ b/Documentation/hwmon/sysfs-interface > > @@ -317,6 +317,13 @@ temp[1-*]_emergency > > Unit: millidegree Celsius > > RW > > > > +temp[1-*]_emergency_hyst > > + Temperature hysteresis value for emergency limit. > > + Unit: millidegree Celsius > > + Must be reported as an absolute temperature, NOT a delta > > + from the emergency value. > > + RW > > + > > temp[1-*]_lcrit Temperature critical min value, typically lower than > > corresponding temp_min values. > > Unit: millidegree Celsius > > I'll merge this chunk into > hwmon-add-tempx_emergency-attribute-to-sysfs-abi.patch, I think it > makes more sense that way. > Sure, you are right. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
