This patchset cleans up the lm90 driver and adds support for Maxim MAX6695/6696 temperature sensors. In detail, - Add support for tempX_emergency_alarm ABI attribute - Introduce device feature bits to reduce runtime overhead - Introduce function to delete sysfs files - Simplify calculations in set_temp11() - Introduce 3rd set of upper temperature limits (named 'emergency' limits) - Add max6659 support for those limits, and add support for max6659 address 0x4e - Add max6695/96 support The patchset depends on the previously submitted lm90 driver cleanup patch. v2 changes: - Split patch into multiple parts - Add support for max6659 address 0x4e and extra features - Improved max6695/96 device detection code - max6695/96 does not support extended external limits, so don't try to read them for the 3rd sensor - Other changes to address review feedback - Updated Documentation/hwmon/lm90 and drivers/hwmon/Kconfig. - Fixed alert_alarms comment - remote offset register not supported on max6658 (fixed comment) - rewrote set_temp11() - Added tempX_emergency_alarm attribute - Some code alignment fixes v3 changes: - Express bit masks using shift values instead of hex constants - Replaced tabs after #define with space - Negated LM90_HAVE_REM_LIMIT_EXT test - Reordered patches 5 and 6 (introduce max6659 first, then its extra features) - Clarified that only max6696 permits multiple I2C addresses - Use max6696 instead of max6695 in chips enum to avoid mixup with max6659 - Fixed register index for temp3_crit_hyst - Moved lm90_select_remote_channel() to avoid forward declaration of lm90_read_reg() - Added comment indicating that lm90_select_remote_channel() must be called with update lock held - Added tempX_emergency_hyst attribute Patches unchanged in v3 are listed as v2 patches and are resubmitted for clarity. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
