Hi Scott, On Mon, 30 Aug 2010 16:55:53 -0400, Scott Shanafelt wrote: > chip "w83627dhg-*" > > label in0 "Vcore" > label in1 "Vnbcore" This is "+1.05V" in SuperMicro's configuration file. > label in2 "AVCC" > label in3 "3VCC" > set in3_min 3.3 * 0.90 > set in3_max 3.3 * 1.10 > label in4 "VDIMM" > label in5 "+5V" > compute in5 @*4, @/4 > label in6 "+12V" > compute in6 @*16, @/16 > set in6_min 12 * 0.90 > set in6_max 12 * 1.10 > label in7 "VSB" Better labelled as "3V3B". > label in8 "Vbat" > > label fan1 "fan1" > ignore fan1 > label fan2 "fan2" > ignore fan2 > label fan3 "fan3" > ignore fan3 > label fan4 "Case Fan" > label fan5 "fan5" > ignore fan5 Most of these labels are pointless, they are double no-ops (once because they don't carry any meaning, twice because you end up ignoring the input anyway.) What we want is fan locations, like: label fan2 "CPU Fan" label fan4 "Case Fan" We also don't want to ignore a fan which exists on the board but you happen to not use. "ignore fan2" shouldn't be there. > > label temp1 "MB Temp" > label temp2 "CPU Temp" > label temp3 "Case Temp" > > ignore cpu0_vid I've added an updated configuration file here: http://www.lm-sensors.org/wiki/Configurations/SuperMicro/X7SPA Thanks for your contribution. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
