Re: No temperature output with k10temp for AMD II X3 435

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15.05.2010 09:06, Jean Delvare wrote:
Hi Florian,

On Sun, 09 May 2010 22:19:11 +0200, Florian Schwade wrote:
Hello,
I have an AMD II X3 435 cpu. Sensors-detect successfully detects the
k10temp module is needed.
There's something missing in your CPU name. Is is an "Athlon II X3" or
a "Phenom II X3"? I guess the former.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           Success!
      (driver `k10temp')
AMD Family 11h thermal sensors...                           No
Intel Core family thermal sensor...                         No
Intel Atom thermal sensor...                                No
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No


I also checked that it is loaded correctly.

[florian@errorkiste ~]$ lsmod |grep k10temp
k10temp                 2827  0

If I run sensors to get the temperature the output is just:

[florian@errorkiste ~]$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1:       +21.0°C  (high = +70.0°C)

21°C is impossible to be the correct temperature. The BIOS reports my
CPU running at something like 36°.
Maybe the BIOS applies an arbitrary offset, or they get the temperature
from an external sensor connected to a hardware monitoring device.

The Kernel is: 2.6.33-ARCH
lm-sensors version: lm_sensors 3.1.2-1

I would appreciate any help. Thanks a lot!
Did you force driver loading? Embedded sensors are known to be
unreliable on the DR-BA, DR-B2, DR-B3, RB-C2 and HY-D0 revisions of the
family 10h CPU. The driver won't bind to such CPUs by default.

Maybe you have found one more unreliable revision. Please provide the
contents of /proc/cpuinfo for your CPU, as well as the socket format.
That being said, unreliability is essentially linked to the socket
format, so the detection code currently in the driver should work even
for future CPU models.

Hi.
Yes it is an AMD Athlon II x3 on Socket AM3. Sorry.
The content of /proc/cpu info is:

cat /proc/cpuinfo
processor    : 0
vendor_id    : AuthenticAMD
cpu family    : 16
model        : 5
model name    : AMD Athlon(tm) II X3 435 Processor
stepping    : 2
cpu MHz        : 800.000
cache size    : 512 KB
physical id    : 0
siblings    : 3
core id        : 0
cpu cores    : 3
apicid        : 0
initial apicid    : 0
fpu        : yes
fpu_exception    : yes
cpuid level    : 5
wp        : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips    : 5790.26
TLB size    : 1024 4K pages
clflush size    : 64
cache_alignment    : 64
address sizes    : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor    : 1
vendor_id    : AuthenticAMD
cpu family    : 16
model        : 5
model name    : AMD Athlon(tm) II X3 435 Processor
stepping    : 2
cpu MHz        : 800.000
cache size    : 512 KB
physical id    : 0
siblings    : 3
core id        : 1
cpu cores    : 3
apicid        : 1
initial apicid    : 1
fpu        : yes
fpu_exception    : yes
cpuid level    : 5
wp        : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips    : 5789.20
TLB size    : 1024 4K pages
clflush size    : 64
cache_alignment    : 64
address sizes    : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor    : 2
vendor_id    : AuthenticAMD
cpu family    : 16
model        : 5
model name    : AMD Athlon(tm) II X3 435 Processor
stepping    : 2
cpu MHz        : 800.000
cache size    : 512 KB
physical id    : 0
siblings    : 3
core id        : 2
cpu cores    : 3
apicid        : 2
initial apicid    : 2
fpu        : yes
fpu_exception    : yes
cpuid level    : 5
wp        : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips    : 5789.22
TLB size    : 1024 4K pages
clflush size    : 64
cache_alignment    : 64
address sizes    : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux