Hello,
I have an AMD II X3 435 cpu. Sensors-detect successfully detects the
k10temp module is needed.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... Success!
(driver `k10temp')
AMD Family 11h thermal sensors... No
Intel Core family thermal sensor... No
Intel Atom thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
I also checked that it is loaded correctly.
[florian@errorkiste ~]$ lsmod |grep k10temp
k10temp 2827 0
If I run sensors to get the temperature the output is just:
[florian@errorkiste ~]$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +21.0°C (high = +70.0°C)
21°C is impossible to be the correct temperature. The BIOS reports my
CPU running at something like 36°.
The Kernel is: 2.6.33-ARCH
lm-sensors version: lm_sensors 3.1.2-1
I would appreciate any help. Thanks a lot!
Regards
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
