Hello I am currently ported in C language. this it will be the next issue. my ideea was to make something like this (tell me it you like) input0=temp1_input;min_temp=N;max_temp=N input1=temp2_input;trigger_temp=N inputN= temp2_input;trigger_temp=N Martin Vool wrote:
Hello, i am writing to you because i want to ask you what do you think of my idea. Currently i can assign only one temperature sensor to a fan. In my setup i need to monitor 2 sensors and set the fan speed accordingly to a single fan. It should not be very complicated to implement this, and implement it so that the old configuration is not deprecated, for example: ... FCTEMPS=hwmon0/device/pwm1=hwmon0/device/temp3_input:hwmon0/device/temp1_input hwmon0/device/pwm2=hwmon0/device/temp2_input MINTEMP=hwmon0/device/pwm1=45:50 hwmon0/device/pwm2=40 MAXTEMP=hwmon0/device/pwm1=55:60 hwmon0/device/pwm2=55 ... or ... FCTEMPS=hwmon0/device/pwm1=hwmon0/device/temp3_input hwmon0/device/pwm1=hwmon0/device/temp1_input hwmon0/device/pwm2=hwmon0/device/temp2_input MINTEMP=hwmon0/device/pwm1=45 hwmon0/device/pwm1=50 hwmon0/device/pwm2=40 MAXTEMP=hwmon0/device/pwm1=55 hwmon0/device/pwm1=60 hwmon0/device/pwm2=55 i personally would prefer the first, since it is more clear on what is going on. When the script calculates the speeds it simply has to look what is the highest RPM required for the monitored sensor. Since i am not used to program in shellscripts i wanted to know if you would like to implement this? If not then i would give it a shot, but the code probably wouldn't be very pretty... What do you think? Martin Vool _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
