Fancontrol script improvement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

i am writing to you because i want to ask you what do you think of my idea.
Currently i can assign only one temperature sensor to a fan. In my
setup i need to monitor 2 sensors and set the fan speed accordingly to
a single fan.

It should not be very complicated to implement this, and implement it
so that the old configuration is not deprecated, for example:

...
FCTEMPS=hwmon0/device/pwm1=hwmon0/device/temp3_input:hwmon0/device/temp1_input
 hwmon0/device/pwm2=hwmon0/device/temp2_input
MINTEMP=hwmon0/device/pwm1=45:50  hwmon0/device/pwm2=40
MAXTEMP=hwmon0/device/pwm1=55:60  hwmon0/device/pwm2=55
...
or
...
FCTEMPS=hwmon0/device/pwm1=hwmon0/device/temp3_input
hwmon0/device/pwm1=hwmon0/device/temp1_input
hwmon0/device/pwm2=hwmon0/device/temp2_input
MINTEMP=hwmon0/device/pwm1=45 hwmon0/device/pwm1=50  hwmon0/device/pwm2=40
MAXTEMP=hwmon0/device/pwm1=55 hwmon0/device/pwm1=60  hwmon0/device/pwm2=55


i personally would prefer the first, since it is more clear on what is going on.

When the script calculates the speeds it simply has to look what is
the highest RPM required for the monitored sensor.

Since i am not used to program in shellscripts i wanted to know if you
would like to implement this? If not then i would give it a shot, but
the code probably wouldn't be very pretty...

What do you think?


Martin Vool

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux