On Mon, 19 Oct 2009, Simon Wilson wrote:
I am soooo close to getting this working properly.
I have a GA-P35-DS3P motherboard, with an E6850 Core 2 Duo processor. The
machine is running CentOS 5.3. It has an it8718 sensors chip.
I have installed lm_sensors 2.10.8 and the kmod-it87 driver from elrepo.org
(needed because of the 'old' CentOS 2.6.18 kernel), and all is basically
working. A clear sensors output reads:
it8718-isa-0290
Adapter: ISA adapter
in0: +1.12 V (min = +0.00 V, max = +0.00 V) ALARM
in1: +1.87 V (min = +1.71 V, max = +1.89 V)
in2: +3.22 V (min = +3.14 V, max = +3.47 V)
in3: +2.91 V (min = +2.83 V, max = +3.12 V)
in4: +0.85 V (min = +2.85 V, max = +3.15 V) ALARM
in5: +0.05 V (min = +0.85 V, max = +1.09 V) ALARM
in6: +0.03 V (min = +1.12 V, max = +1.28 V) ALARM
in7: +3.12 V (min = +2.85 V, max = +3.15 V)
in8: +3.30 V
fan1: 1424 RPM (min = 600 RPM)
fan2: 0 RPM (min = 3994 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +30°C (low = +10°C, high = +60°C) sensor = thermistor
temp2: +26°C (low = +10°C, high = +70°C) sensor = diode
temp3: -2°C (low = +127°C, high = +127°C) sensor = disabled
vid: +0.000 V
Using the configuration from
http://www.lm-sensors.org/wiki/Configurations/Gigabyte/G33-DS3R which also
uses the 8718 I am now at this:
it8718-isa-0290
Adapter: ISA adapter
Vcore: +1.04 V (min = +0.00 V, max = +0.00 V) ALARM
Vram: +1.87 V (min = +1.71 V, max = +1.89 V)
+3.3V: +3.22 V (min = +3.14 V, max = +3.47 V)
+5V: +4.89 V (min = +4.76 V, max = +5.24 V)
+12V: +12.48 V (min = +11.39 V, max = +12.61 V)
Vbat: +3.30 V
CPU Fan: 1421 RPM (min = 600 RPM)
NBr Temp: +30°C (low = +10°C, high = +60°C) sensor = thermistor
CPU Temp: +26°C (low = +10°C, high = +70°C) sensor = diode
vid: +0.000 V
Which is perfect apart from one thing - the 0.000 V value for VID, which is
then also throwing off Vcore (in0) as that is calculated from VID (>95
<105%).
Can anyone help me work out why VID is reading 0.000?
Thanks
Hi,
I have the same board and would like to know as well, my output:
it8718-isa-0290
Adapter: ISA adapter
in0: +1.57 V (min = +0.00 V, max = +4.08 V)
in1: +2.11 V (min = +0.00 V, max = +4.08 V)
in2: +3.23 V (min = +0.00 V, max = +4.08 V)
in3: +2.93 V (min = +0.00 V, max = +4.08 V)
in4: +0.86 V (min = +0.00 V, max = +4.08 V)
in5: +0.08 V (min = +0.00 V, max = +4.08 V)
in6: +0.16 V (min = +0.00 V, max = +4.08 V)
in7: +3.09 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.28 V
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 1117 RPM (min = 0 RPM)
fan4: 1102 RPM (min = 0 RPM)
temp1: +46.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +35.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: -2.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
cpu0_vid: +0.000 V
Justin.
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
