I am soooo close to getting this working properly.
I have a GA-P35-DS3P motherboard, with an E6850 Core 2 Duo processor.
The machine is running CentOS 5.3. It has an it8718 sensors chip.
I have installed lm_sensors 2.10.8 and the kmod-it87 driver from
elrepo.org (needed because of the 'old' CentOS 2.6.18 kernel), and all
is basically working. A clear sensors output reads:
it8718-isa-0290
Adapter: ISA adapter
in0: +1.12 V (min = +0.00 V, max = +0.00 V) ALARM
in1: +1.87 V (min = +1.71 V, max = +1.89 V)
in2: +3.22 V (min = +3.14 V, max = +3.47 V)
in3: +2.91 V (min = +2.83 V, max = +3.12 V)
in4: +0.85 V (min = +2.85 V, max = +3.15 V) ALARM
in5: +0.05 V (min = +0.85 V, max = +1.09 V) ALARM
in6: +0.03 V (min = +1.12 V, max = +1.28 V) ALARM
in7: +3.12 V (min = +2.85 V, max = +3.15 V)
in8: +3.30 V
fan1: 1424 RPM (min = 600 RPM)
fan2: 0 RPM (min = 3994 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +30°C (low = +10°C, high = +60°C) sensor = thermistor
temp2: +26°C (low = +10°C, high = +70°C) sensor = diode
temp3: -2°C (low = +127°C, high = +127°C) sensor = disabled
vid: +0.000 V
Using the configuration from
http://www.lm-sensors.org/wiki/Configurations/Gigabyte/G33-DS3R which
also uses the 8718 I am now at this:
it8718-isa-0290
Adapter: ISA adapter
Vcore: +1.04 V (min = +0.00 V, max = +0.00 V) ALARM
Vram: +1.87 V (min = +1.71 V, max = +1.89 V)
+3.3V: +3.22 V (min = +3.14 V, max = +3.47 V)
+5V: +4.89 V (min = +4.76 V, max = +5.24 V)
+12V: +12.48 V (min = +11.39 V, max = +12.61 V)
Vbat: +3.30 V
CPU Fan: 1421 RPM (min = 600 RPM)
NBr Temp: +30°C (low = +10°C, high = +60°C) sensor = thermistor
CPU Temp: +26°C (low = +10°C, high = +70°C) sensor = diode
vid: +0.000 V
Which is perfect apart from one thing - the 0.000 V value for VID,
which is then also throwing off Vcore (in0) as that is calculated from
VID (>95 <105%).
Can anyone help me work out why VID is reading 0.000?
Thanks
--
Simon Wilson
www.simonandkate.net
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
