On Wed, Jul 29, 2009 at 09:04:57PM +0400, Anton Vorontsov wrote:
> With this patch spi drivers can use standard spi_driver.id_table and
> MODULE_DEVICE_TABLE() mechanisms to bind against the devices. Just
> like we do with I2C drivers.
>
> This is useful when a single driver supports several variants of
> devices but it is not possible to detect them in run-time (like
> non-JEDEC chips probing in drivers/mtd/devices/m25p80.c), and
> when platform_data usage is overkill.
>
> This patch also makes life a lot easier on OpenFirmware platforms,
> since with OF we extensively use proper device IDs in modaliases.
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
> drivers/spi/spi.c | 26 +++++++++++++++++++++++++-
> include/linux/mod_devicetable.h | 13 +++++++++++++
> include/linux/spi/spi.h | 10 ++++++++--
> scripts/mod/file2alias.c | 13 +++++++++++++
> 4 files changed, 59 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index 70845cc..1431bf2 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -59,9 +59,24 @@ static struct device_attribute spi_dev_attrs[] = {
> * and the sysfs version makes coldplug work too.
> */
>
> +static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
> + const struct spi_device *sdev)
> +{
> + while (id->name[0]) {
> + if (!strcmp(sdev->modalias, id->name))
> + return id;
> + id++;
> + }
> + return NULL;
> +}
> +
> static int spi_match_device(struct device *dev, struct device_driver *drv)
> {
> const struct spi_device *spi = to_spi_device(dev);
> + const struct spi_driver *sdrv = to_spi_driver(drv);
> +
> + if (sdrv->id_table)
> + return !!spi_match_id(sdrv->id_table, spi);
>
> return strcmp(spi->modalias, drv->name) == 0;
> }
> @@ -121,6 +136,13 @@ struct bus_type spi_bus_type = {
> };
> EXPORT_SYMBOL_GPL(spi_bus_type);
>
> +static int spi_drv_probe_id(struct device *dev)
> +{
> + const struct spi_driver *sdrv = to_spi_driver(dev->driver);
> + struct spi_device *sdev = to_spi_device(dev);
> +
> + return sdrv->probe_id(sdev, spi_match_id(sdrv->id_table, sdev));
> +}
>
> static int spi_drv_probe(struct device *dev)
> {
> @@ -151,7 +173,9 @@ static void spi_drv_shutdown(struct device *dev)
> int spi_register_driver(struct spi_driver *sdrv)
> {
> sdrv->driver.bus = &spi_bus_type;
> - if (sdrv->probe)
> + if (sdrv->probe_id)
> + sdrv->driver.probe = spi_drv_probe_id;
> + else if (sdrv->probe)
> sdrv->driver.probe = spi_drv_probe;
> if (sdrv->remove)
> sdrv->driver.remove = spi_drv_remove;
> diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
> index 1bf5900..9660dca 100644
> --- a/include/linux/mod_devicetable.h
> +++ b/include/linux/mod_devicetable.h
> @@ -399,6 +399,19 @@ struct i2c_device_id {
> __attribute__((aligned(sizeof(kernel_ulong_t))));
> };
>
> +/* spi */
> +
> +#define SPI_NAME_SIZE 20
> +
> +struct spi_device_id {
> + char name[SPI_NAME_SIZE];
> +#ifdef __KERNEL__
> + void *data;
> +#else
> + kernel_ulong_t data;
> +#endif
> +};
> +
> /* dmi */
> enum dmi_field {
> DMI_NONE,
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index c47c4b4..c8d92a1 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -20,6 +20,7 @@
> #define __LINUX_SPI_H
>
> #include <linux/device.h>
> +#include <linux/mod_devicetable.h>
>
> /*
> * INTERFACES between SPI master-side drivers and SPI infrastructure.
> @@ -86,7 +87,7 @@ struct spi_device {
> int irq;
> void *controller_state;
> void *controller_data;
> - char modalias[32];
> + char modalias[SPI_NAME_SIZE];
>
> /*
> * likely need more hooks for more protocol options affecting how
> @@ -145,6 +146,8 @@ struct spi_message;
>
> /**
> * struct spi_driver - Host side "protocol" driver
> + * @id_table: List of SPI devices supported by this driver
> + * @probe_id: Binds this driver to the spi device via id_table matching.
> * @probe: Binds this driver to the spi device. Drivers can verify
> * that the device is actually present, and may need to configure
> * characteristics (such as bits_per_word) which weren't needed for
> @@ -170,6 +173,9 @@ struct spi_message;
> * MMC, RTC, filesystem character device nodes, and hardware monitoring.
> */
> struct spi_driver {
> + const struct spi_device_id *id_table;
> + int (*probe_id)(struct spi_device *spi,
> + const struct spi_device_id *id);
how about leaving it at just probe and have either a call or a field
in the device that you can look at to see if this was a new style of
call?
> int (*probe)(struct spi_device *spi);
> int (*remove)(struct spi_device *spi);
> void (*shutdown)(struct spi_device *spi);
> @@ -732,7 +738,7 @@ struct spi_board_info {
> * controller_data goes to spi_device.controller_data,
> * irq is copied too
> */
> - char modalias[32];
> + char modalias[SPI_NAME_SIZE];
> const void *platform_data;
> void *controller_data;
> int irq;
> diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
> index 40e0045..9d446e3 100644
> --- a/scripts/mod/file2alias.c
> +++ b/scripts/mod/file2alias.c
> @@ -657,6 +657,15 @@ static int do_i2c_entry(const char *filename, struct i2c_device_id *id,
> return 1;
> }
>
> +/* Looks like: S */
> +static int do_spi_entry(const char *filename, struct spi_device_id *id,
> + char *alias)
> +{
> + sprintf(alias, "%s", id->name);
> +
> + return 1;
> +}
> +
> static const struct dmifield {
> const char *prefix;
> int field;
> @@ -853,6 +862,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
> do_table(symval, sym->st_size,
> sizeof(struct i2c_device_id), "i2c",
> do_i2c_entry, mod);
> + else if (sym_is(symname, "__mod_spi_device_table"))
> + do_table(symval, sym->st_size,
> + sizeof(struct spi_device_id), "spi",
> + do_spi_entry, mod);
> else if (sym_is(symname, "__mod_dmi_device_table"))
> do_table(symval, sym->st_size,
> sizeof(struct dmi_system_id), "dmi",
> --
> 1.6.3.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Ben (ben at fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
