Hi Jean, The patch works fine with the latest 2.6.30-rc6 and sensors-detect. Thanks, Madhu. On Tue, 2009-05-19 at 22:36 +0200, Jean Delvare wrote: > Add support for the new incarnation of the Winbond/Nuvoton W83627DHG > chip known as W83627DHG-P. It is basically the same as the original > W83627DHG with an additional automatic can speed control mode (not > supported by the driver yet.) > > Signed-off-by: Jean Delvare <khali at linux-fr.org> > --- > Documentation/hwmon/w83627ehf | 11 +++++++++-- > drivers/hwmon/w83627ehf.c | 10 +++++++++- > 2 files changed, 18 insertions(+), 3 deletions(-) > > --- linux-2.6.30-rc6.orig/Documentation/hwmon/w83627ehf 2009-05-19 11:06:08.000000000 +0200 > +++ linux-2.6.30-rc6/Documentation/hwmon/w83627ehf 2009-05-19 21:13:02.000000000 +0200 > @@ -12,6 +12,10 @@ Supported chips: > Addresses scanned: ISA address retrieved from Super I/O registers > Datasheet: > http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf > + * Winbond W83627DHG-P > + Prefix: 'w83627dhg' > + Addresses scanned: ISA address retrieved from Super I/O registers > + Datasheet: not available > * Winbond W83667HG > Prefix: 'w83667hg' > Addresses scanned: ISA address retrieved from Super I/O registers > @@ -28,8 +32,8 @@ Description > ----------- > > This driver implements support for the Winbond W83627EHF, W83627EHG, > -W83627DHG and W83667HG super I/O chips. We will refer to them collectively > -as Winbond chips. > +W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them > +collectively as Winbond chips. > > The chips implement three temperature sensors, five fan rotation > speed sensors, ten analog voltage sensors (only nine for the 627DHG), one > @@ -135,3 +139,6 @@ done in the driver for all register addr > The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and > the ICH8 southbridge gets that data via PECI from the DHG, so that the > southbridge drives the fans. And the DHG supports SST, a one-wire serial bus. > + > +The DHG-P has an additional automatic fan speed control mode named Smart Fan > +(TM) III+. This mode is not yet supported by the driver. > --- linux-2.6.30-rc6.orig/drivers/hwmon/w83627ehf.c 2009-05-19 11:06:08.000000000 +0200 > +++ linux-2.6.30-rc6/drivers/hwmon/w83627ehf.c 2009-05-19 14:13:56.000000000 +0200 > @@ -36,6 +36,7 @@ > w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3 > 0x8860 0xa1 > w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 > + w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3 > w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 > */ > > @@ -53,12 +54,13 @@ > #include <asm/io.h> > #include "lm75.h" > > -enum kinds { w83627ehf, w83627dhg, w83667hg }; > +enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg }; > > /* used to set data->name = w83627ehf_device_names[data->sio_kind] */ > static const char * w83627ehf_device_names[] = { > "w83627ehf", > "w83627dhg", > + "w83627dhg", > "w83667hg", > }; > > @@ -86,6 +88,7 @@ MODULE_PARM_DESC(force_id, "Override the > #define SIO_W83627EHF_ID 0x8850 > #define SIO_W83627EHG_ID 0x8860 > #define SIO_W83627DHG_ID 0xa020 > +#define SIO_W83627DHG_P_ID 0xb070 > #define SIO_W83667HG_ID 0xa510 > #define SIO_ID_MASK 0xFFF0 > > @@ -1517,6 +1520,7 @@ static int __init w83627ehf_find(int sio > static const char __initdata sio_name_W83627EHF[] = "W83627EHF"; > static const char __initdata sio_name_W83627EHG[] = "W83627EHG"; > static const char __initdata sio_name_W83627DHG[] = "W83627DHG"; > + static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P"; > static const char __initdata sio_name_W83667HG[] = "W83667HG"; > > u16 val; > @@ -1542,6 +1546,10 @@ static int __init w83627ehf_find(int sio > sio_data->kind = w83627dhg; > sio_name = sio_name_W83627DHG; > break; > + case SIO_W83627DHG_P_ID: > + sio_data->kind = w83627dhg_p; > + sio_name = sio_name_W83627DHG_P; > + break; > case SIO_W83667HG_ID: > sio_data->kind = w83667hg; > sio_name = sio_name_W83667HG; > >
