Hi Matt, On Fri, 5 Dec 2008 17:44:15 -0600 (CST), Matt Roberds wrote: > Short version: Nothing blew up, *and* the new version found everything > that the old (released with 3.0.3) version did. I didn't have to give > any non-default answers to the new version. > > Long version: I unloaded the relevant kernel modules to simulate running > sensors-detect on a system that hasn't had lm_sensors set up before. I > didn't use any command-line arguments to sensors-detect, and I took all > the defaults by hitting "enter" at each prompt. I did this for both the > version from lm_sensors 3.0.3 (sensors-detect version 5337) and the > latest version (sensors-detect version 5530). This is on a system with > an Asus M2N-SLI Deluxe motherboard. > > The results from version 5337 (shipped with 3.0.3): > > --- > Driver `to-be-written' (should be inserted): > Detects correctly: > * Bus `SMBus nForce2 adapter at 1c40' > Busdriver `i2c-nforce2', I2C address 0x2e > Chip `Analog Devices ADT7475' (confidence: 5) > > Driver `it87' (should be inserted): > Detects correctly: > * ISA bus, address 0x290 > Chip `ITE IT8716F Super IO Sensors' (confidence: 9) > > Driver `k8temp' (should be inserted): > Detects correctly: > * Chip `AMD K8 thermal sensors' (confidence: 9) > > Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): > To load everything that is needed, add this to one of the system > initialization scripts (e.g. /etc/rc.d/rc.local): > > #----cut here---- > # I2C adapter drivers > modprobe i2c-nforce2 > # Chip drivers > # no driver for Analog Devices ADT7475 yet > modprobe it87 > modprobe k8temp > /usr/local/bin/sensors -s > #----cut here---- > --- > > The results from version 5530: > > --- > Driver `it87': > * ISA bus, address 0x290 > Chip `ITE IT8716F Super IO Sensors' (confidence: 9) > > Driver `to-be-written': > * Bus `SMBus nForce2 adapter at 1c40' > Busdriver `i2c-nforce2', I2C address 0x2e > Chip `Analog Devices ADT7475' (confidence: 5) > > Driver `k8temp': > * Chip `AMD K8 thermal sensors' (confidence: 9) > > Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): > To load everything that is needed, add this to one of the system > initialization scripts (e.g. /etc/rc.d/rc.local): > > #----cut here---- > # Chip drivers > modprobe it87 > # no driver for Analog Devices ADT7475 yet > modprobe k8temp > /usr/local/bin/sensors -s > #----cut here---- > --- > > The probe order with 5530 was: > > southbridge/CPU/memory > super I/O > IPMI > ISA > SMBus > > I got the new script via svn this time, so the $Revision$ was replaced > with the actual version number. Looks good, thanks for reporting and thanks for your helpful suggestions! -- Jean Delvare
