Hello, I've got a problem using lm-sensors with my computer. I'm on Ubutnu 7.1 (64bit version; 2.6.22-14-generic), with an Asus K8V-MX mainboard(AMD64 3000+) and a Zalman CNPS7000A cooler. First I just installed lm-sensors with 'sudo apt-get install lm-sensors' worked without a problem. Then I did 'sudo sensors-detect' and answered all questions with yes. But 'sudo pwmconfig' told me to check my fans: ------------------------------------------------ Found the following devices: hwmon0/device is k8temp hwmon1/device is w83627ehf Found the following PWM controls: hwmon1/device/pwm1 hwmon1/device/pwm1_enable stuck to 1 Failed to set pwmhwmon1/device/pwm1 to full speed Something's wrong, check your fans! ------------------------------------------------ This is what 'sudo sensors' told me: ------------------------------------------------ k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +24?C w83627ehf-isa-0290 Adapter: ISA adapter VCore: +1.15 V (min = +0.00 V, max = +1.74 V) in1: +12.41 V (min = +8.29 V, max = +12.62 V) AVCC: +3.23 V (min = +3.60 V, max = +4.08 V) ALARM 3VCC: +3.15 V (min = +3.06 V, max = +4.08 V) in4: +1.62 V (min = +1.78 V, max = +2.01 V) ALARM in5: +1.73 V (min = +0.31 V, max = +1.77 V) in6: +5.58 V (min = +5.50 V, max = +0.64 V) ALARM VSB: +3.15 V (min = +4.08 V, max = +3.60 V) ALARM VBAT: +2.03 V (min = +1.17 V, max = +1.52 V) ALARM in9: +1.63 V (min = +0.42 V, max = +1.53 V) ALARM Case Fan: 0 RPM (min = 42 RPM, div = 128) ALARM CPU Fan: 2678 RPM (min = 1875 RPM, div = 4) Aux Fan: 0 RPM (min = 48 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM Sys Temp: +30?C (high = +93?C, hyst = -88?C) CPU Temp: +21.0?C (high = +80.0?C, hyst = +75.0?C) AUX Temp: +28.5?C (high = +80.0?C, hyst = +75.0?C) ----------------------------------------------------- But becaus of pwmconfig was not working, fancontrol wasn't able to do anything: ---------------------------------------------------- Loading configuration from /etc/fancontrol ... grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory grep: /etc/fancontrol: No such file or directory Some mandatory settings missing, please check your config file! ---------------------------------------------------- So I decided to use the Subversion to get the newest lm-sensors source. This is the result: 'sudo sensors' ------------------------------------------------------------------ w83627ehf-isa-0290 Adapter: ISA adapter VCore: +1.14 V (min = +0.00 V, max = +1.74 V) in1: +12.36 V (min = +8.29 V, max = +12.62 V) AVCC: +3.18 V (min = +3.60 V, max = +4.08 V) ALARM 3VCC: +3.18 V (min = +1.01 V, max = +4.08 V) in4: +1.63 V (min = +1.66 V, max = +2.01 V) ALARM in5: +1.73 V (min = +0.31 V, max = +1.77 V) in6: +5.63 V (min = +5.50 V, max = +0.64 V) ALARM VSB: +3.18 V (min = +4.05 V, max = +3.60 V) ALARM VBAT: +2.03 V (min = +1.17 V, max = +1.52 V) ALARM in9: +1.62 V (min = +0.42 V, max = +1.53 V) ALARM Case Fan: 0 RPM (min = 42 RPM, div = 128) ALARM CPU Fan: 2700 RPM (min = 3750 RPM, div = 2) ALARM Aux Fan: 0 RPM (min = 48 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM Sys Temp: +38.0?C (high = +93.0?C, hyst = -88.0?C) CPU Temp: +28.5?C (high = +80.0?C, hyst = +75.0?C) AUX Temp: +35.0?C (high = +80.0?C, hyst = +75.0?C) k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +33.0?C -------------------------------------------------------------- 'sudo pwmconfig' -------------------------------------------------------------- Found the following devices: hwmon0/device is k8temp hwmon1/device is w83627ehf Found the following PWM controls: hwmon1/device/pwm1 hwmon1/device/pwm1 stuck to 0 Manual control mode not supported, skipping hwmon1/device/pwm1. hwmon1/device/pwm2 hwmon1/device/pwm2 stuck to 0 Manual control mode not supported, skipping hwmon1/device/pwm2. hwmon1/device/pwm3 hwmon1/device/pwm3 stuck to 0 Manual control mode not supported, skipping hwmon1/device/pwm3. There are no usable PWM outputs. -------------------------------------------------------------- Speedstepping works without I probelm (when Cool and Quiet support is activated in the bios) I've installed the newest bios, but it didn't help me. And my bios it self does not give the the possibility to control my CPU-fan speed (There is nothing like Q-fan). So what am I doing wrong? Thanks for your help, Martin W. 'sudo lsmod': ----------------------------------------------------------------------------------- Module Size Used by ipv6 317192 8 af_packet 28172 2 rfcomm 47656 2 l2cap 28672 11 rfcomm bluetooth 63876 4 rfcomm,l2cap ppdev 11272 0 ac 7304 0 container 6400 0 dock 12264 0 video 21140 0 button 10400 0 sbs 21520 0 battery 12424 0 powernow_k8 16608 0 cpufreq_ondemand 10896 1 cpufreq_userspace 6048 0 cpufreq_powersave 3072 0 cpufreq_conservative 9608 0 cpufreq_stats 8160 0 freq_table 6464 3 powernow_k8,cpufreq_ondemand,cpufreq_stats w83627ehf 24464 0 i2c_isa 6400 1 w83627ehf sbp2 27144 0 lp 15048 0 tda827x 9348 1 saa7134_alsa 17440 0 saa7134_dvb 21004 0 dvb_pll 18436 1 saa7134_dvb video_buf_dvb 8708 1 saa7134_dvb dvb_core 94768 1 video_buf_dvb tda1004x 18692 2 saa7134_dvb tuner 70184 0 snd_via82xx 33192 1 gameport 18704 1 snd_via82xx snd_mpu401_uart 11008 1 snd_via82xx snd_seq_dummy 5380 0 snd_seq_oss 36864 0 snd_seq_midi 11008 0 snd_rawmidi 29824 2 snd_mpu401_uart,snd_seq_midi usbhid 32576 0 nvidia 7013492 34 hid 33408 1 usbhid saa7134 148308 2 saa7134_alsa,saa7134_dvb snd_via82xx_modem 18444 0 snd_ac97_codec 122200 2 snd_via82xx,snd_via82xx_modem video_buf 30084 4 saa7134_alsa,saa7134_dvb,video_buf_dvb,saa7134 compat_ioctl32 11136 1 saa7134 snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi parport_pc 41896 1 pcmcia 46232 0 ac97_bus 4096 1 snd_ac97_codec snd_pcm_oss 50048 0 snd_mixer_oss 20096 1 snd_pcm_oss ir_kbd_i2c 11536 1 saa7134 snd_seq 62496 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq psmouse 45596 0 parport 44172 3 ppdev,lp,parport_pc snd_pcm 94344 5 saa7134_alsa,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss snd_timer 27272 2 snd_seq,snd_pcm ir_common 38916 2 saa7134,ir_kbd_i2c i2c_viapro 11544 0 pcspkr 4608 0 serio_raw 9092 0 videodev 31360 1 saa7134 v4l2_common 21888 4 tuner,saa7134,compat_ioctl32,videodev v4l1_compat 15364 2 saa7134,videodev k8temp 7680 0 snd_page_alloc 12560 3 snd_via82xx,snd_via82xx_modem,snd_pcm snd 69288 15 saa7134_alsa,snd_via82xx,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_pcm,snd_timer soundcore 10272 1 snd shpchp 38300 0 i2c_core 30208 11 w83627ehf,i2c_isa,tda827x,saa7134_dvb,dvb_pll,tda1004x,tuner,nvidia,saa7134,ir_kbd_i2c,i2c_viapro yenta_socket 30220 1 rsrc_nonstatic 14208 1 yenta_socket pcmcia_core 46628 3 pcmcia,yenta_socket,rsrc_nonstatic pci_hotplug 36612 1 shpchp evdev 13056 4 ext3 146576 7 jbd 69360 1 ext3 mbcache 11272 1 ext3 ide_cd 35488 0 cdrom 41768 1 ide_cd ide_disk 20352 9 ata_generic 9988 0 floppy 69608 0 ehci_hcd 40076 0 via_rhine 28936 0 mii 7424 1 via_rhine uhci_hcd 29600 0 usbcore 161584 4 usbhid,ehci_hcd,uhci_hcd sata_via 14596 0 libata 138928 2 ata_generic,sata_via scsi_mod 172856 2 sbp2,libata via82cxxx 11268 0 [permanent] ide_core 141200 3 ide_cd,ide_disk,via82cxxx ohci1394 38984 0 ieee1394 109528 2 sbp2,ohci1394 thermal 16528 0 processor 36232 2 powernow_k8,thermal fan 6920 0 fuse 52528 1 apparmor 47008 0 commoncap 9472 1 apparmor ----------------------------------------------------------------------------------- 'sudo lspci': ----------------------------------------------------------------------------------- 00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) 00:0c.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 00:0d.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1) ----------------------------------------------------------------------------------- _______________________________________________________________________ Jetzt neu! Sch?tzen Sie Ihren PC mit McAfee und WEB.DE. 30 Tage kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc=022220
