On Wed, 2008-02-27 at 18:13 +0800, Alexey Starikovskiy wrote:
> Rui,
>
> As I remember, ACPI returns temperature in 10ths of degree. If you are
> going to report it in 1000ths of degree,
> there is no reason to round them to degree.
>
Show the temperature in Millidegree Celsius.
Signed-off-by: Zhang Rui <rui.zhang at intel.com>
---
drivers/acpi/thermal.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
Index: linux-2.6/drivers/acpi/thermal.c
===================================================================
--- linux-2.6.orig/drivers/acpi/thermal.c
+++ linux-2.6/drivers/acpi/thermal.c
@@ -879,6 +879,8 @@ static void acpi_thermal_check(void *dat
}
/* sys I/F for generic thermal sysfs support */
+#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
+
static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
{
struct acpi_thermal *tz = thermal->devdata;
@@ -886,7 +888,7 @@ static int thermal_get_temp(struct therm
if (!tz)
return -EINVAL;
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(tz->temperature));
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
}
static const char enabled[] = "kernel";
@@ -980,21 +982,21 @@ static int thermal_get_trip_temp(struct
if (tz->trips.critical.flags.valid) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.critical.temperature));
trip--;
}
if (tz->trips.hot.flags.valid) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.hot.temperature));
trip--;
}
if (tz->trips.passive.flags.valid) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.passive.temperature));
trip--;
}
@@ -1002,7 +1004,7 @@ static int thermal_get_trip_temp(struct
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.active[i].temperature));
trip--;
}
