Hi all: I've been AFK for quite a while... * Jean Delvare <khali at linux-fr.org> [2008-01-02 15:30:41 +0100]: > > Hi Rudolf, > > Le 29/12/2007, "Rudolf Marek" <r.marek at assembler.cz> a ?crit: > >If there is no correlation found, you may try changing the base PWM > >frequency. I don't recall if the driver supports it (imho w83627th F ?) > > The W83627THF does DC fan control, not PWM, so there's no base frequency > to change. Not that it would have helped anyway, if the board is wired > for control then PWM=0 will stop the fan no matter the frequency. > Changing the frequency only changes the response curve. > > What Pelle could try is to connect a fan to the 3rd fan header then run > pwmconfig again. But as you said, if is very frequent that only the CPU > fan can be controlled and not the case fans, so I wouldn't hold my > breath. I have this exact board (P4C800E-Deluxe), and I can confirm that only the CPU fan header allows fan control. Sorry. Regards, -- Mark M. Hoffman mhoffman at lightlink.com
