Hi Rudolf, Thank you very much! You are very nice, and you really helped a lot. Yongkui On 11/5/06, Rudolf Marek <r.marek at assembler.cz> wrote: > > > I run the CPU burn benchmark for only 1 minute (plus 15 minutes system > > idle before running cpuburn, and 15 minutes system idle after cpuburn > > stops running), I even got the following message when the cpuburn > > program started running for less than 1 minute: > > --------------------------------------------- > > Message from syslogd at localhost <mailto:syslogd at localhost> at Mon Oct 30 > > 11:39:21 2006 ... > > localhost kernel: CPU0: Temperature above threshold > > I think it is 90C so now you know that the temp is measured correctly. If > you > have 88C this may be just error of measurement. So your cooling cools > quite well. > > > Any suggestions on controlling the CPU fan speed? > > Please check the other thread. > > Regards > Rudolf > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20061106/9c5bfaa1/attachment.html
