Hi Marcus, > tested sensors.conf (see attachment) for Tyan S2720 from Tyan's ftp > server, but just get the follwing strange output. Any ideas, what's > going wrong here? > > System: Linux 2.6.15-25-server #1 SMP (Ubuntu dapper) > > Thanks, > Marcus > > --------- > adm1021-i2c-0-19 > Adapter: SMBus I801 adapter at ec80 > CPU 2 temp: > -1?C (low = -1?C, high = -1?C) ALARM > (N/A,LOW,HIGH) > ERROR: Can't get die-code data! Hmm strange, please can you provide output of i2cdump 0 0x19 and i2cdump 0 0x18 ? And BTW try first change the BIOS, quoting the sensors.conf # therefore does not require the i2c-isa module. Currently, the # # BIOS also has a problem with the CPU temps. If they read -1, # # or 255, check the Tyan website for an updated BIOS. # I think it should solve it. > > w83627hf-isa-0290 > Adapter: ISA adapter > Fan4: 0 RPM (min = 168750 RPM, div = 2) > Fan5: 0 RPM (min = 225000 RPM, div = 2) > Fan6: 0 RPM (min = 337500 RPM, div = 2) Maybe you need to change the fan divisor to see the fan set fan1_div 4 (as the tynan config file suggests) > alarms: > beep_enable: > Sound alarm disabled > > w83627hf-i2c-0-2a > Adapter: SMBus I801 adapter at ec80 > Fan4: 0 RPM (min = 0 RPM, div = 128) > Fan5: 0 RPM (min = 0 RPM, div = 128) > Fan6: 0 RPM (min = 0 RPM, div = 128) > (beep) Heh same chip can be accessed both from ISA or from SMBUS. Please do not load i2c-isa and you will get rid of this duplicity. > alarms: > beep_enable: > Sound alarm enabled > > w83782d-i2c-0-29 > Adapter: SMBus I801 adapter at ec80 > +3.3V: +3.34 V (min = +3.14 V, max = +3.46 V) > +5V: +4.97 V (min = +4.73 V, max = +5.24 V) > +12V: +12.04 V (min = +10.82 V, max = +13.19 V) > VBat: +2.10 V (min = +2.40 V, max = +3.60 V) > CPU1 Fan: 9642 RPM (min = 84375 RPM, div = 2) > CPU2 Fan: 9642 RPM (min = 84375 RPM, div = 2) > Fan3: 0 RPM (min = 84375 RPM, div = 2) > VRM Temp: +45?C (high = +100?C, hyst = +90?C) sensor = > transistor > alarms: Chassis intrusion detection ALARM > beep_enable: > Sound alarm disabled > --------- Hope it helps, Regards Rudolf
