On 06/07/06, Rudolf Marek <r.marek at sh.cvut.cz> wrote:
> Albert wrote:
> > Hi Rudolf
> > On 06/07/06, Rudolf Marek <r.marek at sh.cvut.cz> wrote:
> This errors are normal. Ignore them.
It seems that I was too hasty in replying. I ran sensors-detect again
and it did detect the chip.
# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +0.90 V (min = +0.00 V, max = +0.00 V) ALARM
VCore 2: +1.52 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: +3.30 V (min = +3.14 V, max = +3.47 V)
+5V: +4.95 V (min = +4.76 V, max = +5.24 V)
+12V: +11.92 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: -2.16 V (min = -13.18 V, max = -10.80 V)
-5V: -3.49 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +5.03 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +2.05 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 225000 RPM, div = 2)
fan2: 0 RPM (min = 7417 RPM, div = 2)
fan3: 0 RPM (min = 675000 RPM, div = 2)
temp1: +47??C (high = +73??C, hyst = -28??C) sensor = thermistor
temp2: +73.0??C (high = +80??C, hyst = +75??C) sensor = thermistor
temp3: -46.0??C (high = +80??C, hyst = +75??C) sensor = thermistor
vid: +0.000 V (VRM Version 8.2)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at d800
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
Now to set up the alarms...
Thanks for your help. It is much appreciated.
Albert
