Hi Rudolf On 06/07/06, Rudolf Marek <r.marek at sh.cvut.cz> wrote: > Maybe they just forgotten it to activate .... > > Enter configuration mode > > isaset -y -f 0x2e 0x87 Data mismatch, wrote 0x87, read 0xff back. > isaset -y -f 0x2e 0x87 Data mismatch, wrote 0x87, read 0xff back. > > select logical device 0xb - hw monitor > isaset -y 0x2e 0x2f 0x07 0xb No issue here > > select base addr: (assuming 0x290 is safe, check /proc/ioports and see if the > 0x290 - 0x29F is empty) The address ranges are open > > isaset -y 0x2e 0x2f 0x61 0x90 > isaset -y 0x2e 0x2f 0x60 0x2 no issue here > > activate it: > isaset -y 0x2e 0x2f 0x30 0x1 no issue here > > Leave configuration mode > isaset -y -f 0x2e 0xaa Data mismatch, wrote 0xaa, read 0xff back. Seems to me that it is not there at all. I'm sending an email to Ampro to find out what is going on here. I'll let you know as soon as I have more info from them. Thanks for your help. Albert
