Hello all,
I subscribed to the list because I am trying to configure lm-sensors for
my ASUS K8N-VM motherboard, which features a nvidia nforce410 chipset
(the one with geforce6100 integrated). So far I have good results with
the w83627ehf kernel module, yielding the following output:
-------
d3vlin at arrakis ~ $ sensors
w83627ehf-isa-0290
Adapter: ISA adapter
Chassis Fan: 1795 RPM (min = 1205 RPM, div = 8)
CPU Fan: 3245 RPM (min = 1704 RPM, div = 8)
System Temp: +28?C (high = +60?C, hyst = +40?C)
CPU Temp: +30.0?C (high = +60.0?C, hyst = +40.0?C)
Chipset Temp: +33.0?C (high = +60.0?C, hyst = +40.0?C)
d3vlin at arrakis ~ $
-------
As one might notice, there is no information about VCore / 3.3V etc.
displayed. I have tried some modules, i2c_nforce2 in particular, but no
results. I wonder if there is support for this chipset or if anyone has
better results. I have included the relevant part of my
/etc/sensors.conf below.
Best regards,
Daan Willems
-------
chip "w83627ehf-*"
# Fans
label fan1 "Chassis Fan"
set fan1_min 1200
label fan2 "CPU Fan"
set fan2_min 1700
ignore fan3
ignore fan4
# Temperatures
label temp1 "System Temp"
label temp2 "CPU Temp"
label temp3 "Chipset Temp"
set temp1_over 60
set temp1_hyst 40
set temp2_over 60
set temp2_hyst 40
set temp3_over 60
set temp3_hyst 40
# Voltages
label in0 "+3.3V"
label in1 "Vtt1.2V"
label in2 "Vram"
label in3 "Vchip"
label in4 "+5V"
label in5 "+12V"
label in6 "Vcc1.5V"
label in7 "Vcore"
label in8 "5VSB"
-------
