On Sun, 18 Jun 2006 22:17:15 +0200 Jean Delvare <khali at linux-fr.org> wrote: > > my BIOS does have such an idle loop, too. > > Temperature is increasing from about 35 degrees immidiately after > > entering BIOS up to 46 degrees met after a few minutes. > > Looking at sensors output while linux is idle, i get shown about 30 > > degrees with sensors default computation line for asus CUSL. > > So I'd say the compute line is correct and you don't need to change > it. > Hi, i did make some tests (sorry for late reply): CPU busy ======== Linux: (mprime cpu stressing): lm-sensors: 44? C BIOS: (instantly reset switch): 43? C CPU idle ======== Linux: lm-sensors: 38? C BIOS: (instantly reset switch): 36? C BIOS ==== (probably cpu load, loop) 45? C sensors.conf compute line: compute temp2 (@*30/43)+34, (@-25)*43/30 instead of default: compute temp2 (@*30/43)+25, (@-25)*43/30 Motherboard: Asus CUSL2C Or did i overlook anything? regards, gimeshell
